• Home
  • Dual Voltage HotCoat Powder Coat Elite Kit

    Dual Voltage HotCoat Powder Coat Elite Kit

    Item #12450

    Dual-Voltage HotCoat gun, 4 standard colors plus black and more

    Details

    "Elite" Dual-Voltage HotCoat Kit comes with everything for powder-coating, including 4 standard colors of your choice, and gloss black With our dual-voltage HotCoat powder coating gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Kit has everything you'll need (except compressed air and a dedicated oven) to achieve the benefits of powder coating and expert results.
    • Includes your choice of 4 standard colors, plus black
    • Extremely durable finish
    • Coat and cure in under an hour!
    • Easy to apply
    • Quick color changes
    • Economical

    About Dual Voltage HotCoat Powder Coat Elite Kit

    This elite kit includes one of the market's best powder coating spray guns. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. Plus, thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

    One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat Powder Coating System requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

    (See "Contents" tab for all the specific items included in this Dual-Voltage "Elite" kit.)


    Contents

    11676 Eastwood Dual-Voltage HotCoat Gun
    1/2-lb. Black Gloss Powder
    51558 Powder Chip Color Chart
    10078 Reusable Hi-Temp Silicone Plugs
    10027 Hi-Temp Masking Tape (1/2" x 36-yard roll)
    43045 1-lb. Stainless Steel Hanging Wire
    34066 In-Line Air Filter
    3 Empty Powder Bottles with screw-on tops
    Beginning Powder Coater's Handbook


    Accessories

    10041Z PRE Painting Prep
    51081 Metal Wash Metal Prep
    19418ZP Fast Etch Rust Remover and Metal Prep
    20473 2-Stage Air Dryer System
    58111 Pack of 20 Hooks
    58112 Silicone Cap & Plug Kit
    11477 Infrared Thermometer
    10590 Infrared Curing Lamp
    10255 Hotcoat Powder High-Tech Color Sample Kit
    10421 High-Temp Masking Tape Kit


    FAQs

    (Q) Can I use my household oven?
    (A) No, you cannot use an oven that will be used to cook/bake food.

    (Q) How long do I bake/cure the part?
    (A) 20 minutes at 400 degreesF.

    (Q) Can I remove the powder coating?
    (A) Yes, use 12849 Powder Coat & Paint Dissolver (Qt.) or 12850 Powder Coat & Paint Dissolver (Gal.) .

    (Q) How do I know what the colors will look like?
    (A) Order our 51558 HotCoat Powder Coating Chip Chart (free in our kits).


    Safety

    Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh cartridges when curing or inspecting flow-out progress.


    Customers also viewed: