• Home
  • Eastwood Dual Voltage Powder Gun Starter Kit

Eastwood Dual Voltage Powder Gun Starter Kit

Item #11698 Brand: Eastwood

Kit includes our Dual-Voltage
Gun, gloss black powder and more!

Details

Our best value! HotCoat Powder-Coating Starter Kit includes our Dual-Voltage gun for greater versatility With our dual-voltage HotCoat powder coating gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop! Besides the dual-voltage gun, this kit also includes gloss black color, plus all the other powder coating supplies else you'll need (except compressed air and a dedicated oven) to achieve expert results.
  • Extremely durable finish
  • Coat and cure in under an hour!
  • Easy to apply
  • Quick color changes
  • Economical

More info...

About Eastwood Dual Voltage Powder Gun Starter Kit

Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the over-sprayed powder. Contains no environmentally harmful solvents. HotCoat Powder Coating System requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

(See "Contents" tab for all the specific powder coating supplies included in this Dual-Voltage kit.)


Contents

11676 Eastwood Dual-Voltage HotCoat Gun
1/2-lb. Black Gloss Powder
51558 Powder Chip Color Chart
10078 Reusable Hi-Temp Silicone Plugs
10027 Hi-Temp Masking Tape (1/2" x 36-yard roll)
43045 1-lb. Stainless Steel Hanging Wire
34066 In-Line Air Filter
3 Empty Powder Bottles with Screw-On Tops


Specs

Accessories

10041Z PRE Painting Prep
51081 Metal Wash Metal Prep
19418ZP Fast Etch Rust Remover and Metal Prep
20473 2-Stage Air Dryer System
58111 Pack of 20 Hooks
58112 Silicone Cap & Plug Kit
11477 Infrared Thermometer
10590 Infrared Curing Lamp


FAQs

(Q) Can I use my household oven?
(A) No, you cannot use an oven that will be used to cook/bake food.

(Q) How long do I bake/cure the part?
(A) 20 minutes at 400 degreesF.

(Q) Can I remove the powder coating?
(A) Yes, use 12849 Powder Coat & Paint Dissolver (Qt.) or 12850 Powder Coat & Paint Dissolver (Gal.) .

(Q) How do I know what the colors will look like?
(A) Order Eastwood's 51558 HotCoat Powder Coating Chip Chart (free in our kits).


Safety

Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh cartridges when curing or inspecting flow-out progress.


Warranty

1-year mfr's. warranty against defects.

Designed, engineered and tested to Eastwood's specifications.

Final product imported.


Customers also viewed: