• Home
  • Eastwood Dual Voltage Powder Gun Starter Kit
Eastwood Dual Voltage Powder Gun Starter Kit is rated 4.5806 out of 5 by 31.
Rated 4 out of 5 by from No more rattle cans! I was tired of painting my “hard work” with a rattle can. I would even buy the “professional” quality spray cans, but after a while, it just wouldn’t hold up. I needed something that would hold up better. The brackets I have fabricated, truck parts, motorcycle parts, turbo compressor housing, & restoration jobs needed something more professional and durable. This gun (kit) was the next step for me. It is okay quality at a cheap price. I am very pleased with it (I didn’t expect a pro-level system). The gun is a little fragile so you have to treat it nice. With a small amount of patience, it will turn out top-notch results! Yes it’s worth it.
Date published: 2013-10-25
Rated 4 out of 5 by from 1st Time Powder Coater This is the first time I used a powder coating gun at all, that being said I thought this product performed flawlessly. It is much easier to powder coat parts well than to paint them. When I was powder coating some larger parts I had a little trouble getting powder into the smaller crevices so I switched the gun over to the lower voltage and the powder stuck to the part without any trouble. The dual voltage options is definetly a plus to have. The starter kit was great. But it is only a starter, I'd recommend buying more tape (although aluminum foil works great for larger areas. Would definetly recommend this product to a friend.
Date published: 2010-11-20
Rated 5 out of 5 by from Good DIY Kit for the Price!! I've had a chance to use this several times now & I must say that it works very well!! The results are great & it's so easy to do!! I'll continue to use it for my current project as well as when I have the time & resources to finish up my long-term project! As for the gun itself, it would be nice to see more of a metal outer structure to it, but as long as you treat it with care & store it in a secure spot, there shouldn't be a problem with it. Overall, it's a value-priced powder-coating system that can give you great results if you follow the instructions & coat in a clean work environment.
Date published: 2013-06-20
Rated 5 out of 5 by from EXCELLENT TOOL I bought this gun 2 months ago and have used it about 10 times. I have shot the gloss black and the blasted aluminum with outstanding results. Specifically, I have shot 3 pully's with the gloss black and it stands up to the test. I dropped the piece on purpose to test it and while it did mark it, it did not break through the coating. The blasted aluminum looks great on my throttle bracket and radiator hold downs. I have had many of my friends ask me to do parts for them beacause of the way the finish looks. I would highly reccomend this gun; stay with the dual voltage..it comes in handy.
Date published: 2011-09-01
Rated 5 out of 5 by from It is everything Eastwood claims it is. Two weeks ago I knew nothing about powder coating and now I wouldn't buy spray paint again.I've now powder coated a number of items on a custom reverse trike including the extended swingarm, a-arms, and spindles and it looks great and was really easy to do. Having the dual voltage really helps get into tight places and I'm amazed at how far 8oz of powder will go as I still haven't used all it came with. A sand blasting cabinet is a must to get the old pain off and ensure clean metal. The aluminum wheels are next. I'm confident they will look just as good. Thanks for a great product.
Date published: 2012-03-06
Rated 5 out of 5 by from Excellent for a starter kit This is my first try at powder coating and I went with the Eastwood dual voltage kit. Setup of the gun itself was very easy and the instructions were simple. I would recommend a beginners book on the subject. Preparation of the part to be PC is VERY important. My first project was an aluminum differential cover. I first cleaned and degrease, then media blast and then used Eastwood's chrome and clear powders. Attached are some shots of the cover. Would definitely recommend this product to a friend
Date published: 2011-11-13
Rated 3 out of 5 by from ok but not what I expected based on reviews I purchased the dual voltage powder coat gun to powder coat aluminum auto parts. It works ok but I ended up spraying more powder in my small booth than on the part to get it covered evenly. Now I per-heat my parts and I get a much better result - mainly because the powder sticks to parts with or without the electrostatic charge when they are hot.
Date published: 2013-08-06
Rated 5 out of 5 by from Excellent tool I would highly advise anyone looking to do some powder caoting to use this gun. I have done pulley's in gloss black and they are outstanding. I dropped one of the pulley's on the concrete to test it and while it did mark the surface, it did not break through the coating. I am starting to do pieces for my friends because of the way the finish looks. I have also used the blasted aluminum with great results as well. Stay with the dual voltage gun..it will come in handy!
Date published: 2011-09-01
  • 2016-02-12T08:44CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_US, sid_11698, PRD, sort_relevancy
  • clientName_eastwood

What happens if you use a heat gun?

Asked by: blackbeast
Well, the FIRST thing you'll do is blow all of your powder off of your piece. What comes next won't matter. Oh, did I fail to mention atomized powder is explosive?  Don't use a heat gun. Use an ELECTRIC OVEN, or I.R. heat lamp.
Answered by: Roosterz Rodshop
Date published: 2015-10-25

What size of air compressor do you need for this powder gun starter kit? 

Asked by: Boogie
You don't need much of a compressor. You can use as small as an air brush compressor. Little to no CFM is required and 5-10 PSI
Answered by: SeanA
Date published: 2015-12-23

What kind of PSI/CFM would you need to run to the gun ?

Asked by: MINIMAN
little to no CFM needed, it could be ran off of a air brush compressor. 5-10psi
Answered by: SeanA
Date published: 2015-12-23

Does this only works with a 110v power supply or is it a dual power to make it work in Europe?

Asked by: Johann
This only runs off of a 110v power supply. A converter would have to be purchased to make it work in Europe.
Answered by: S Church
Date published: 2015-07-09

Can you use any other brand of powder coating powders besides the Hot Coat?

Asked by: trailjammer
Other powders will work in our powder gun.
Answered by: S Church
Date published: 2015-06-24

are you able to change the tip to a flat spray instead of a circular one

Asked by: Efren
There are no other spray tips available for the powder guns.
Answered by: NickC
Date published: 2015-07-09

If the part os to big for the oven can I use a heat gun to cure.

Asked by: Eddy
A heat gun will not be able to be used to cure the parts. Without an oven large enough to fit the part you will need to use a curing lamp like this one: http://www.eastwood.com/infrared-powder-curing-system.html
Answered by: MikeL
Date published: 2015-02-17

Can it be used on aluminum.

Asked by: Dwayne
Yes this can be used on ALL metals
Answered by: SeanA
Date published: 2015-03-14
  • 2016-02-12T08:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_11698, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Dual Voltage Powder Gun Starter Kit

Item #11698 Brand: Eastwood

Kit includes our Dual-Voltage
Gun, gloss black powder and more!


Our best value! HotCoat Powder-Coating Starter Kit includes our Dual-Voltage gun for greater versatility With our dual-voltage HotCoat powder coating gun, you can powder coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Either way, you'll get all the benefits of powder coating in your own shop! Besides the dual-voltage gun, this kit also includes gloss black color, plus all the other powder coating supplies else you'll need (except compressed air and a dedicated oven) to achieve expert results.
  • Extremely durable finish
  • Coat and cure in under an hour!
  • Easy to apply
  • Quick color changes
  • Economical

More info...

About Eastwood Dual Voltage Powder Gun Starter Kit

Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the over-sprayed powder. Contains no environmentally harmful solvents. HotCoat Powder Coating System requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

(See "Contents" tab for all the specific powder coating supplies included in this Dual-Voltage kit.)


11676 Eastwood Dual-Voltage HotCoat Gun
1/2-lb. Black Gloss Powder
10078 Reusable Hi-Temp Silicone Plugs
10027 Hi-Temp Masking Tape (1/2" x 36-yard roll)
43045 1-lb. Stainless Steel Hanging Wire
34066 In-Line Air Filter
3 Empty Powder Bottles with Screw-On Tops



10041Z PRE Painting Prep
10120 Eastwood Metal Wash
19418ZP Fast Etch Rust Remover and Metal Prep
20473 2-Stage Air Dryer System
58111 Pack of 20 Hooks
58112 Silicone Cap & Plug Kit
11477 Infrared Thermometer
10590 Infrared Curing Lamp


(Q) Can I use my household oven?
(A) No, you cannot use an oven that will be used to cook/bake food.

(Q) How long do I bake/cure the part?
(A) 20 minutes at 400 degreesF.

(Q) Can I remove the powder coating?
(A) Yes, use Eastwood Paint and Powder Stripper (Q) What are the electrical requirements?
(A) This HotCoat Gun requires 110-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-240VAC to 110-125VAC as long as the transformer can handle 2 amps.


Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh cartridges when curing or inspecting flow-out progress.


1-year mfr's. warranty against defects.

Designed, engineered and tested to Eastwood's specifications.

Final product imported.

Customers also viewed: