- Eastwood Diamond Clear Satin Painted Surfaces 10.5 oz
Eastwood Diamond Clear Satin Painted Surfaces 10.5 oz
Item #10197Z Brand: Eastwood
Diamond Clear™ for Painted Surfaces adds a semi-gloss/satin finish as it protects your vehicle's newly painted components.
- Semi-gloss satin finish
- Resists chips, cracks, fading
- Withstands up to 300 degrees F
Use Diamond Clear™ as a top coat for most cured lacquer and enamel paints. Special low-sheen formulation won't offset the "soft" OEM-like finishes of detail paints.
About Eastwood Diamond Clear Satin Painted Surfaces 10.5 oz
You've detail-painted your vehicle's components. Now spend a few moments to protect your work. Detail Clear utilizes a special low-sheen formulation that won't offset the "soft" OEM-like finishes of detail paints. It dries fast and resists fading, chipping, cracking. Compatible with most thoroughly cured enamel and lacquer paints.
One aerosol can 11 oz net wt.
Only apply to cured surfaces.
Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
This coating can be applied over most coatings without causing mottling including the metallic finishes we sell. Dries to the touch in 5-10 minutes at humidity 77 degrees F. Fully cured in 48 hours at 77 degrees F at 50% humidity. 55-60% gloss. Can be recoated at any time @77 degrees or warmer, 50% or less humidity. Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free. Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion