- Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces
Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces
Item #10197Z Brand: Eastwood
- Semi-gloss satin finish
- Resists chips, cracks, fading
- Withstands up to 300 degreesF
About Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces
You've detail-painted your vehicle's components. Now spend a few moments to protect your work. Detail Clear utilizes a special low-sheen formulation that won't offset the "soft" OEM-like finishes of detail paints. It dries fast and resists fading, chipping, cracking. Compatible with most thoroughly cured enamel and lacquer paints. Buy 3 or more and SAVE!
One aerosol can 11 oz net wt.
Only apply to cured surfaces. Buy 3 or more and SAVE!
Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
This coating can be applied over most coatings without causing mottling including the metallic finishes we sell. Dries to the touch in 5-10 minutes at humidity 77 degrees F. Fully cured in 48 hours at 77 degrees F at 50% humidity. 55-60% gloss. Can be recoated at any time @77 degrees or warmer, 50% or less humidity. Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free. Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.