• Home
  • Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces

Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces

Item #10197Z Brand: Eastwood

Low-sheen formula won't offset "soft" OEM-like finishes of detail paints

Details

Diamond Clear™ for Painted Surfaces adds a semi-gloss/satin finish as it protects your vehicle's newly painted components Use Diamond Clear™ as a top coat for most cured lacquer and enamel paints. Special low-sheen formulation won't offset the "soft" OEM-like finishes of detail paints.
  • Semi-gloss satin finish
  • Resists chips, cracks, fading
  • Withstands up to 300 degrees F

About Eastwood Diamond Clear Semi-Gloss Satin/painted surfaces

You've detail-painted your vehicle's components. Now spend a few moments to protect your work. Detail Clear utilizes a special low-sheen formulation that won't offset the "soft" OEM-like finishes of detail paints. It dries fast and resists fading, chipping, cracking. Compatible with most thoroughly cured enamel and lacquer paints.


Contents

One aerosol can 11 oz net wt.


Accessories

Only apply to cured surfaces.


Warranty

Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


Application

This coating can be applied over most coatings without causing mottling including the metallic finishes we sell. Dries to the touch in 5-10 minutes at humidity 77 degrees F. Fully cured in 48 hours at 77 degrees F at 50% humidity. 55-60% gloss. Can be recoated at any time @77 degrees or warmer, 50% or less humidity. Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free. Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.


Customers also viewed: