• Home
  • EW 100lb Pressure Abrasive Blaster

EW 100lb Pressure Abrasive Blaster

Item #51118 Brand: Eastwood

100-lb. blaster has large, high-flow valves to speed rust/paint removal

Details

100-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster

  • 100-lb. media capacity
  • Large 1/2"-I.D. blaster hose and fittings
  • 8'-long, heavy-wall blast hose with dead-man valve
  • Requires just 10cfm at 90psi
  • All-steel welded top-loading hopper and pressure gauge

Bigger is better! Eastwood's "High-Flow" Pressure abrasive blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.


More info...

About EW 100lb Pressure Abrasive Blaster

Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blasting machine completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5"H x 12"W.

Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. 1-year limited warranty.


Contents

100-lb.-capacity Blaster (30-60 minutes of blasting)
Blast Hood
Moisture Separator
1/2"-ID x 8'-long Hose
4 Ceramic Nozzles (2.0, 2.5, 3.0 and 5mm)


Instructions

Click here for instructions


Safety

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, and body protection must be worn during use. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH- approved respiratory protection while operating this equipment.


Customers also viewed: