- Eastwood 12 Inch Box and Pan Sheet Metal Brake
Are additional fingers available separately?
Is the inside of a bend sharp? If not, what is the bend radius? Are parts avaqilable for different bend radius's?
Eastwood 12 Inch Box and Pan Sheet Metal Brake
Item #20664 Brand: Eastwood
The Eastwood 12 Inch Box and Pan Sheet Metal Brake is the perfect size for a small shop or home use.
- Bends sheet metal up to 12"
- Use on up to 20 gauge steel or 16 gauge aluminum
- Makes bends up to 135 degrees
- Removable fingers to create pans or boxes
- Perfect size for small shop
The Eastwood 12 inch Box and Pan Brake is a precision engineered metal working tool designed to produce accurate, variable length bends in angles up to 135° in mild, 20 gauge sheet steel and 18 gauge aluminum in widths up 12”. Create complex shapes such as floor reinforcement channels and ribs, sections of corrugated pickup bed floors; truck bedside panels, inner fender structures and much more, all with one convenient bench-mounted tool.
(1) Eastwood 12 Inch Box and Pan Sheet Metal Brake
Metal Width:Bends up to 12"
Metal Gauge: Up to 20 gauge steel or 16 gauge aluminum
Bend Angles: Up to 135 degrees
Removable Fingers: 5
(1) 1 x 1 inch
(2) 2 x 2 inch
(1) 1 x 3 inch
(1) 1 x 4 inch
This tool is considerably heavy. Use extreme caution when mounting or dismounting when using a vice or other temporary fixturing arrangement. Personal injury could occur if tool is dropped. Pinch Hazard. Keep fingers away from moving parts when operating. Wear appropriate work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands and arms. Wear appropriate eye protection. Metal chips can be ejected during the bending process.
Eastwood 100% Satisfaction Guarantee.
Questions & Answers