- Eastwood 200-lb. Pressure Abrasive Blaster
Eastwood 200-lb. Pressure Abrasive Blaster
Item #51119 Brand: Eastwood
Huge 200-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster
- Extra-large 200-lb. media capacity
- Large 1/2"-I.D. blaster hose and fittings
- 8'-long, heavy-wall blast hose with deadman valve
- 4 ceramic nozzles included
- All-steel welded top-loading hopper and pressure gauge
- Requires just 10 cfm at 90 psi
Bigger is better, both in media capacity and blasting volume! Eastwood's 200-lb.-capacity, "High-Flow" Pressure Blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.
About Eastwood 200-lb. Pressure Abrasive Blaster
Just connect to a compressor, put on appropriate hood and respiratory protection, fill with abrasive and blast. Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10 cfm at 90 psi will work fine.
Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. 1-year limited warranty.
200-lb.-capacity Blaster (60-120 minutes of blasting)
1/2"-ID x 8'-long Hose
4 Ceramic Nozzles (2.0, 2.5, 3.0 and 5.0mm)
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, and body protection must be worn during use. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH- approved respiratory protection while operating this equipment.
Customers also viewed:
100-lb. blaster has large, high-flow valves to speed rust/paint removal
50-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $149.99
Easiest way to neatly pour abrasive into a blaster; also filters debrisOnly $15.79
USA-made 2-in-1 blaster works with as little as 10 cfm at 90 psiOnly $699.99
2-in-1 blaster works with as little as 10 cfm at 90 psi
An affordable way to media blast parts without taking up much room in your shop
Eastwood's Blast Cabinet is ideal for blasting large automotive parts.
Switch "on the fly" between soda and abrasive media...or combine!