- EW 50lb Pressure Abrasive Blaster
EW 50lb Pressure Abrasive Blaster
Item #51117 Brand: Eastwood
50-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster
- 50-lb. media capacity
- Large 1/2"-I.D. blaster hose and fittings
- 8'-long, heavy-wall blast hose with dead-man valve
- Requires just 10 cfm at 90 psi
- All-steel welded top-loading hopper and pressure gauge
Eastwood's "High-Flow" Pressure Blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.
About EW 50lb Pressure Abrasive Blaster
Sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve make this one rugged, durable, and very efficient abrasive blaster. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10 cfm at 90 psi will work fine. 10"W x 14"L x 33"H.
Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. 1-year limited warranty.
50-lb.-capacity Blaster (15-30 minutes of blasting)
1/2"-ID x 8'-long Hose
4 Ceramic Nozzles (2.0, 2.5, 3.0 and 5mm)
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, and body protection must be worn during use. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH- approved respiratory protection while operating this equipment.
Customers also viewed:
An affordable way to media blast parts without taking up much room in your shop
Switch "on the fly" between soda and abrasive media...or combine!
100-lb. blaster has large, high-flow valves to speed rust/paint removal
Huge 200-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $207.99
Easiest way to neatly pour abrasive into a blaster; also filters debrisOnly $15.79
USA-made 2-in-1 blaster works with as little as 10 cfm at 90 psiOnly $699.99
2-in-1 blaster works with as little as 10 cfm at 90 psi