• Home
  • Eastwood '70-'72 GM Mulsanne Blue Metallic Kit

    Eastwood '70-'72 GM Mulsanne Blue Metallic Kit

    Item #50266Z GM Mulsanne Blue Metallic

    Premium acrylic urethane topcoat for exceptional long-lasting beauty

    Details

    Eastwood's premium '70-'72 GM Mulsanne Blue Metallic Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

    This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

    • 96-fl.-oz. '70-'72 GM Mulsanne Blue MetallicAutomotive Paint
    • 32-fl.-oz. Activator required (included in 51712)
    • Catalyzed urethane for unsurpassed durability
    • Highly resistant to UV rays, chemicals, chips

    More info...

    About Eastwood '70-'72 GM Mulsanne Blue Metallic Kit

    Eastwood's Muscle Colors are blended to replicate your favorite colors of the '60s and '70s. GM Paint Code 26 1970-72 Chevelle.

    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.


    Contents

    Choose from the following:
    51712ZP is the '70-'72 GM Mulsanne Blue Metallic Single-Stage Urethane Topcoat, Gallon, with Activator
    50266ZP is the '70-'72 GM Mulsanne Blue Metallic Topcoat, Gallon, without Activator
    21856ZP is the Eastwood Urethane Activator, 32-oz.


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


    Accessories

    10194ZP PRE Painting Prep, Quart
    51605 Concours HVLP Paint Gun Kit
    51686 Concours HVLP Detail Gun
    20474 4-Stage Dry Air System
    50040ZP Master Paint Prep Kit
    51561Z 6" Liquid Ice Buffing Kit
    34053 Hobby Air Fresh-Air System
    51559 Digital Regulator
    50244ZP Epoxy Gray Primer, Gallon
    50245ZP Epoxy Primer Catalyst, Gallon
    50240ZP 2K Urethane Gray Primer, Gallon
    50241ZP 2K Urethane Primer Catalyst, Quart


    FAQs

    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


    Safety

    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


    Product Information Sheet

    Click here to view product information sheet


    Customers also viewed: