- EW After Blast
EW After Blast
Item #11971ZP Brand: Eastwood
Use "After Blast" after blasting or sanding metal, then paint, prime or powder-coat.
- Spray, wipe and repeat until clean
- Aqueous cleaners and phosphoric acid clean and etch the metal
- Zinc phosphate coating improves paint, primer or powder adhesion
- Also protects against flash corrosion
After Blast cleans, degreases and etches just-blasted or newly-sanded metal to improve adhesion for painting, priming or powder-coating.
About EW After Blast
After Blast is designed to clean, degrease and etch freshly blasted or sanded metal prior to painting or powder coating. Use with a plastic spray bottle to liberally apply to the part, wipe and reapply until all contaminants are removed. The blend of aqueous cleaners and phosphoric acid properly cleans, etches the metal and leaves a zinc phosphate coating that is excellent for paint, primer or powder adhesion. Also protects the metal from flash corrosion for extended periods. Use on all your fresh cast iron, steel or aluminum components.
Use after abrasive, soda blasting or sanding/grinding operations to assure of a clean paint ready metal surface.
Use in well ventilated area and wear rubber gloves
made in USA 1 year shelf life
Use on cast iron steel and aluminum to clean and properly etch the metal for coatings. The phosphoric acid will etch the metal and provide an excellent surface etch for paint adhesion. Use on frames, sheet metal engine blocks and suspension components after blasting. Do not apply to painted surfaces, chrome, plastic or glass.
Customers also viewed:
"Paint Over Rust" chassis coat in semi-gloss black
Starting at: $24.32
Durability and precision of a 2-component coating, without the paint gun
Starting at: $23.99
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Starting at: $12.89