• Home
  • Eastwood Boulevard Black Paint

Eastwood Boulevard Black Paint

Item #50371 Boulevard Black Paint

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood's premium Boulevard Black Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

  • 96-fl.-oz. Boulevard Black Automotive Paint
  • 32-fl.-oz. Activator required (included in 50371)
  • Catalyzed urethane for unsurpassed durability
  • Highly resistant to UV rays, chemicals, chips

More info...

Contents

Choose from the following:
50371ZP is the Boulevard Black Single-Stage Urethane Topcoat, Gallon, with Activator
50210ZP is the Boulevard Black Topcoat, Gallon, without Activator
51143ZP is the Boulevard Black, 1-qt. can, with activator
51004ZP is the Boulevard Black, 1-qt. can, without activator


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


Accessories

DONT FORGET THESE PAINTING ESSENTIALS!
SAS Bandit Respirator
Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Razor Blades


FAQs

(Q) Do I need a clear?
(A) No, but you should use a clearcoat over metallics.

(Q) How much paint do I need?
(A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


Safety

Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


Product Information Sheet

Click here to view product information sheet


Chip Chart

Click here for product instructions


Customers also viewed: