• Home
  • Eastwood Boulevard Black Paint

    Eastwood Boulevard Black Paint

    Item #50371 Boulevard Black Paint

    Premium acrylic urethane topcoat for exceptional long-lasting beauty

    Details

    Eastwood's premium Boulevard Black Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

    This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

    • 96-fl.-oz. Boulevard Black Automotive Paint
    • 32-fl.-oz. Activator required (included in 50371)
    • Catalyzed urethane for unsurpassed durability
    • Highly resistant to UV rays, chemicals, chips

    More info...

    Contents

    Choose from the following:
    50371ZP is the Boulevard Black Single-Stage Urethane Topcoat, Gallon, with Activator
    50210ZP is the Boulevard Black Topcoat, Gallon, without Activator
    51143ZP is the Boulevard Black, 1-qt. can, with activator
    51004ZP is the Boulevard Black, 1-qt. can, without activator


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


    Accessories

    10194ZP PRE Painting Prep, Quart
    51605 Concours HVLP Paint Gun Kit
    51686 Concours HVLP Detail Gun
    20474 4-Stage Dry Air System
    50040ZP Master Paint Prep Kit
    51561Z 6" Liquid Ice Buffing Kit
    34053 Hobby Air Fresh-Air System
    51559 Digital Regulator
    50244ZP Epoxy Gray Primer, Gallon
    50245ZP Epoxy Primer Catalyst, Gallon
    50240ZP 2K Urethane Gray Primer, Gallon
    50241ZP 2K Urethane Primer Catalyst, Quart


    FAQs

    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


    Safety

    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


    Customers also viewed: