• Home
  • Eastwood Burn Out Blue Metallic Basecoat Gallon 54221

    Eastwood Burn Out Blue Metallic Basecoat Gallon 54221

    Item #54221ZP

    Apply a durable urethane finish

    Details

    Burn Out Blue Metallic Basecoat adds the superior durability of urethane to the ease of conventional basecoats Burn Out Blue Metallic Metallic Basecoat Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.
    • Apply a durable urethane finish wherever you live in the continental US, even CA
    • Choose a fast, medium or slow Low-VOC Activator below
    • Mixes 4:1 with your activator choice

    More info...

    About Eastwood Burn Out Blue Metallic Basecoat Gallon 54221

    Eastwood's innovative Urethane Basecoat Paint System combines the ease of use of conventional basecoats with the superior durability and unmatched performance of more modern urethanes. And because it's a Low VOC system, it meets regulatory limits in highly regulated areas, eliminating the need to switch to a waterborne system. If you combine the basecoat system with our new finish to any car, anywhere in the continental U.S. Mixes 4:1 with Eastwood's Low VOC Urethane Activator.


    Contents

    One US Gallon of paint, 128 Fl. Oz, one quart of activator (Choice of slow, medium or Fast)


    Accessories

    SAS Bandit Respirator
    1/4” Digital Regulator
    Gray Urethane Primer Surfacer
    1.7mm Needle/Nozzle Set
    Low VOC Clear Gallon Kit
    Evolution gun stand
    Pre Painting Prep Aerosol
    Concours Paint Gun
    Liquid Ice Finishing System


    Safety

    Always wear eye, skin and respiratory protection. Always paint in a well ventilated area. Consult MSDS and Tech Data sheets for proper safety precautions.


    Product Information Sheet

    Click here for product instructions


    Application

    Prep surface and remove all traces of contaminants. Use Eastwood's PRE Prep. Sand existing finish with 400 to 600 grit abrasive. Reclean surface. Mix 4:1 with activator. Reduction not necessary. Shake Well. HVLP Gun Nozzle Size 1.2mm to 1.4mm. Apply in 2 medium wet coats with 50% overlap. Allow 10 minutes flash time between each coat. Clear coat can be applied after 20 to 30 minutes. Maximum recoat time is 18 hours. Otherwise surface must abraded with 400 to 600 grit. Use 50307ZP Low VOC Clear & Activator Pot life is about 2 hours at 70°FApplication


    Customers also viewed: