• Home
  • Eastwood Chop Top Silver Metallic

Eastwood Chop Top Silver Metallic

Item #50372 ZP Chop Top Silver Metallic

Product Name Price Qty
Eastwood Chop Top Silver and Activator Kit
Only $119.99
Eastwood Chop Top Silver Metallic 3:1 Urethane Enamel
Only $99.99
Eastwood Urethane Activator 32 oz
Only $20.99

Details

EW Chop Top Silver Metallic is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.
Eastwood PRE Painting Prep

Eastwood PRE Painting Prep

Starting at: $7.99

Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

Only $159.99
     

About Eastwood Chop Top Silver Metallic


EW Chop Top Silver Metallic is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.
Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70ø. HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.
10194ZP PRE Painting prep in quarts
51605 Concourse HVLP Gun Kit
51686 Concours Detail Gun
20474 4-stage dry air system
50040ZP Master paint Prep Kit
51561Z 6" liquid Ice Buffing Kit
34053 Hobby Air fresh air breathing system
51559 Digital regulator
Q: Do I need a clear?
A: No, but you should use one over metallics.
Q: How much paint do I need?
A: Typically one gallon per car. If you are painting jams, under hood, under the trunk, use 2 gallons. For large cars and pick up trucks, 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.
Always wear proper eye, skin and respiratory protection Always paint in a well ventilated area away from sparks & open flame Consult MSDS & Product data Sheets for proper safety precautions.


Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.