• Home
  • Eastwood Chop Top Silver Metallic

Eastwood Chop Top Silver Metallic

Item #50372 ZP Chop Top Silver Metallic

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood's premium Chop Top Silver Metallic Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

  • 96-fl.-oz. Chop Top Silver Metallic Automotive Paint
  • 32-fl.-oz. Activator required (included in 50372)
  • Catalyzed urethane for unsurpassed durability
  • Highly resistant to UV rays, chemicals, chips

About Eastwood Chop Top Silver Metallic

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.


Contents

Choose from the following:
50372ZP is the Chop Top Silver Metallic Single-Stage Urethane Topcoat, Gallon, with Activator
50211ZP is the Chop Top Silver Metallic Topcoat, Gallon, without Activator
21856ZP is the Eastwood Urethane Activator, 32-oz.


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


Accessories

10194ZP PRE Painting Prep, Quart
51605 Concours HVLP Paint Gun Kit
51686 Concours HVLP Detail Gun
20474 4-Stage Dry Air System
50040ZP Master Paint Prep Kit
51561Z 6" Liquid Ice Buffing Kit
34053 Hobby Air Fresh-Air System
51559 Digital Regulator
50244ZP Epoxy Gray Primer, Gallon
50245ZP Epoxy Primer Catalyst, Gallon
50240ZP 2K Urethane Gray Primer, Gallon
50241ZP 2K Urethane Primer Catalyst, Quart


FAQs

(Q) Do I need a clear?
(A) No, but you should use a clearcoat over metallics.

(Q) How much paint do I need?
(A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


Safety

Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


Customers also viewed: