- Eastwood Contour Glazing Putty
Eastwood Contour Glazing Putty
Item #glazing 13521
Before painting, use this glazing putty to fill pinholes and sand other minor imperfections that can ruin the look of your final finish. Use over sanded substrates, steel and galvanized steel.
- Fills pinholes
- Sands scratches and imperfections
- Can be applied to large areas without distortion
- Mix with other body fillers
About Eastwood Contour Glazing Putty
Easily spreads very thin and can be sanded to an ultra-thin feather edge. Mix with body fillers to improve their spreading and sanding ability. Unlike other putties, our glazing putty can be spread over larger areas and fill without distorting contours. May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles "Basic Body Repair" DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand
Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/16" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-180-grit to achieve desired contour. Final finish with finer abrasives. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.
CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.
Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.
Customers also viewed:
Flexible spring steel applicators are perfect for spreading body filler, glazesOnly $9.99
Push the lever for feather edging, metal prep, finish work on body filler
1-step filler actually inhibits rust and self-etches, to save you timeOnly $59.99
Spray-on a "show-car" finish; powered by your home compressor
Sands all types of flat and contoured surfaces; use wet or dry
Stronger-than-it-looks portable stand holds up to 500 lbs.!
Removes silicone, wax, polish, grease; promotes paint/powder adhesion