• Home
  • Eastwood Fender Roller and Fender Finisher

Eastwood Fender Roller and Fender Finisher

Item #11989

"Roll" inner fender lip for clearance;
use fender finisher for final touch

In stock

  1. Eastwood Fender Roller Tool
    Item #31158

    Only $69.99

    Sale $64.97

    In stock

  2. Eastwood Fender Forming Pliers
    Item #16022
    Only $29.99

    In stock

$0.00

Details

Eastwood's exclusive Fender-Rolling Tool and Fender Finisher Kit won't let your fender ruin expensive tires on lowered vehicles

First use the Roller to easily and quickly “roll” the entire inner lip on a wheel opening to increase fender/tire clearance. Then use the Fender Finisher™ for the final touch, creating a crisp, smooth edge, with the lip pressed fully up against the body for the ideal fender clearance

Eastwood Fender Roller

  • Professional grade high quality tool for years of service
  • Durable powder coated finish
  • Delrin® ball-bearing fender-former wheel
  • A must have for lowered vehicles
  • Increases tire to fender clearance
  • Non-Marring Delrin®forming roller
  • Fits a wide range of automotive and light trucks
  • Durable heavy steel powder coated construction

Increase tire/fender clearance with this pro grade forming tool. Slotted holes will accommodate up to a 120.6 mm (4.75") 4 and 5 lug bolt circles. Bolts directly to hub flange, and is held in place with the included dished washers and vehicles lug nuts. Forming arm adjusts from 14" to 22 3/4". Delrin ® ball bearing forming roller is tough enough to form the fender without damaging the paint. Limited one year warranty. NOTE - This item is Non-returnable. If defective we will replace the tool. Will not fit Porsche wheel lug bolt pattern.

Eastwood Fender Finisher

  • Will work on most vehicles
  • No need to remove wheel or lift vehicle
  • Quality constructed and will last for years
  • Padded jaws to protect painted surfaces

Use the Eastwood Fender Finisher to flatten the inner sheet metal lip of the front fenders to gain more clearance when going to a larger size wheel/tire combo or lowering the vehicle.Constructed from stamped steel frame with molded hand grips and a durable powder coated finish this tool will last for years. Replaceable rubber pads (two extra included) will not damage painted surfaces. To be used on the front fenders only.

Use a heat gun (not included) to gently heat the paint on the outside of the fender to ease the forming without damage to the paint.


More info...

About Eastwood Fender Roller and Fender Finisher

Our Exclusive Fender-Rolling Tool bolts directly onto the wheel's hub flange, and the elongated holes in the adapter plate fit all popular 4- and 5-bolt hubs. It's held in place with the included dished washers and your vehicle's lug nuts. Accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles. Forming arm adjustability ranges from a minimum of 14" to a maximum of 22-3/4" hub-center-to-edge-of-roller to handle most automotive and light truck projects. Non-returnable. Limited one-year warranty: if defective, we'll replace the tool.

Delrin® ball-bearing fender-former roller is tough enough to easily form the fender, but without damaging the paint finish. To prevent paint from cracking when forming wheel arches, gently heat the paint before forming; we recommend our Heat Pro Deluxe Variable-Temperature Heat Gun Kit (43522).

Eastwood Fender Finisher. Extended-reach handle gives you the leverage you need to "roll" fenders easily, without having to remove the wheel. A typical car will take 20-30 minutes, and can be done without jacking-up the car or removing the wheel. Stamped steel frame with molded hand grips and a durable powder-coated finish. Replaceable rubber pads (two extra included) will not damage painted surfaces. Tool weighs 2.5 lbs. and is about 12" long overall.


Instructions

Download Eastwood Fender Roller Tool instructions PDF


Safety

Make sure vehicle is secure before removing wheels. Use quality jack stands and wheel chocks. Always wear eye protection.


FAQs

(Q) Will the Fender Roller work on all passenger cars?
(A) For the most part, yes, but won't work with vehicles with larger hubs, such as trucks, VWs and Porsches.

(Q) Will it work on all fenders?
(A) Yes, except dual-thickness flanged fenders, mostly found on the rear of full-size cars, such as a 1987 Grand National.

(Q) What range will it extend?
(A) From the center of the hub to the roller it will extend from 14" to 22-3/4".

(Q) How do I avoid damaging the automotive paint?
(A) Use a heat gun to gently heat the paint on the outside of the fender as you use work.


Warranty

Limited one-year warranty: Non returnable, if defective, we'll replace the tool.


Customer Reviews

Questions & Answers