- Eastwood Gray Epoxy Primers
Eastwood Gray Epoxy Primers
Item #51126 Gray Epoxy Primer
Eastwood Gray DTM (Direct To Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.
- Can be used as a primer or sealer
- Excellent adhesion and corrosion resistance
- Fast Drying & Maintains good color holdout
- Sand-able - 2-3 days
- Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes
Eastwood's Gray automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.
About Eastwood Gray Epoxy Primers
After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.
SPRAY GUN SETUPHVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi
Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.
Eastwood Urethane Reducers
51604 Concours Primer/Base Paint Gun
12569 Master Gun Cleaning Kit
12846Z Eastwood Aerosol-Injected Cleaner
10041ZP PRE Painting Prep
11456 Bandit Respirator
20473 2 stage air dryer system
Eastwood Epoxy Primer 2 Gallon Kit: Includes 128 ounces of primer and 128 ounces of catalyst
Eastwood Epoxy Primer 2 Quart Kit: Includes 32 ounces of primer and 32 ounces of catalyst
Always wear eye, respirator and skin protection use in a well ventilated are consult MSDS for specific warnings precautions.
Customers also viewed:
Maintains good color hold-out on steel, aluminum, fiberglass, body fillers
Starting at: $39.99
2-component buff surfacer designed for overall jobs
Starting at: $69.99
Eastwood White DTM Epoxy Primer and Catalyst Kit
Starting at: $39.99
The foundation to a great paint jobOnly $169.99
2K AreoSpray™ Epoxy Primer Black
Precision of a 2-component coating without the paint gun
2-component black surfacer designed for overall jobsOnly $89.49
2-component gray surfacer designed for overall jobsOnly $89.99
Delivers the shine and miles-deep appearance of a show-quality finishOnly $124.99