• Home
  • Eastwood MP200i Multi Process Welder and Versa Cut 20 Plasma Cutter

Will a house 120 outlet be ok to run the 200i mig welder?

Asked by: Roro fox
The MP200i is a 220v only machine.
Answered by: Scott C
Date published: 2017-11-03

is there an option with this package for the bigger plasma cutter?

Asked by: Stickyapple1
At this time there is not a package for the larger plasma.
Answered by: S Church
Date published: 2017-08-17

What size generator would run that?

Asked by: hammer55
MP200i would require 12,000 watt to run full power and the Versa cut 20 would 2,400 Watts.
Answered by: S Church
Date published: 2017-06-23
  • y_2017, m_11, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_20489-20062, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood MP200i Multi Process Welder and Versa Cut 20 Plasma Cutter

Item #20489-20062

Buy Both a Welder and Plasma Cutter at a Discount
$0.00

Details

Buy this combination Welder and Plasma Cutter and Save!

Eastwood MP200i Multi Process Welder

This is a true “one machine does it all” welder! MIG, Stick or TIG weld all from a single compact, space-saving unit.

  • One machine does it all! No need to buy and store separate MIG, TIG or Stick welders
  • Weld everything from thin body panels to frames, tubing and heavy plate steel up to: MIG = 3/8”, TIG = ¼” and Stick/ARC = ¼”
  • Weld aluminum up to ¼” with the optional Eastwood #20518 Spool Gun Kit
  • Inverter Technology provides high power in a light, compact unit. Weighs less than 30 lbs. (13kg.). Power it with a generator and weld anywhere
  • 30-220 Amp output, 220 volt, 36 Amp input, 50/60 Hz
  • Dual Digital output displays
  • MIG / Flux Function, the peak amperage is 200 amps with a duty cycle of 20% at the full 200 amps
  • TIG / Stick Function, the peak amperage is 175 amps with a duty cycle of 30% at 160 amps
  • Backed by Eastwood's no-hassle 3-year warranty

The Inverter Technology efficiently allows welding all types of steel from thin gauge to heavier pieces with equal ability. Add an optional Eastwood 20518 Spool Gun and weld aluminum too.

Get the Eastwood MP200i and have it all. Weld quick and clean with MIG weld where you do not have shielding gas with Stick or lay dimes on the TIG setting. This machine does it all especially when you add the optional spool gun. 200 amps of inverter power. Efficient power consumption. Usable in 50 and 60hz power. Perfect for generator power. Duty cycle of 20% at 200amps MIG TIG and Stick welding Spool Gun optional Dual Digital display Easy to read and set amperage and wire speed for repeatable welds every time. Spot timer for replicating spot or stitch welds from 0.1 to 10 seconds.

Eastwood Versa Cut 20 Plasma Cutter

Cut Quickly, Cleanly with Precision

Designed especially for cutting automotive sheet metal with speed and accuracy.

  • Minimal air requirements, only 3 CFM @ as low as 30 PSI
  • High precision 0.65mm cutting tip provides a narrow cut with minimal slag. Eliminates the need to weld-prep panels for welding
  • Delivers a powerful 15 Amps of output to cut up to 1/8” thick metal
  • Compact case is easy to pick up and carry. Weighs less than 20lbs
  • Operates anywhere on standard 110V current

This is the Plasma Cutter to have for cutting out rusted floors, body panels and more. Perfect for trimming new panels and cutting up to 1/8” thick stock.


More info...

Contents

20489 Eastwood MP200i Multi Process Welder

1 – MP200i Welder
1 - Shielding Gas Regulator
1 - Shielding Gas Hose, 4.6’ [1.4m]
1 - Ground Clamp with 10’ [3m] Cable
1 - MIG Torch with 9’ [2.75m] Cable
1 - Electrode Holder with 12.5’ [3.8m] Cable
1 - TIG Torch with 10’ [3m] cable, 14’ [4.3m] Gas Line
1 - #4 Gas Nozzle (1/4”)
1 - #5 Gas Nozzle (5/16”)
1 - #6 Gas Nozzle (3/8”) (Installed)
1 - Short Black Cap (Installed)
1 - Long Black Cap
1 - Collet Body, 1/8” [3.2mm] (Installed)
3 – Collets, 1/16” [1.6mm] (1 - Installed)
1 – 1/16” x 6” Tungsten (Gray)
1 – Welding Wire Spool, 2lb., 0.030” Solid Wire
5 – Welding Rods, 1/8” E6013
1 - Instruction Manual

Eastwood Versa Cut 20 Plasma Cutter

(1) Eastwood Versa-Cut 20 Plasma Cutter
(1) Trafimet Style S25K Torch with 20' [6m] Supply Line
(1) 10' [3m], 120 VAC, 14 gauge grounded Power Cord
(1) 10' [3m], Ground Lead and Clamp
(1) Extra Electrode
(1) Extra Nozzle
(1) Instruction Booklet

Our Versa Cut Plasma Cutter is supplied with the popular NEMA 15P plug, requiring a NEMA 15R receptacle.


Specifications

Eastwood MP200i Multi Process Welder


Output Amperage: 30-200A DC
No Load Voltage: 69V
Rated Input Current: 36A
Input Voltage: 1ph, 220/240 VAC, 60Hz
Rated Duty Cycle: 20%@200 Amps
Weight: 28 lbs. (13 kg.)
Overall Dimensions: 17.7" x 9.4" x 13.8"

MIG Welding Wire

Solid: 0.023-0.035" (0.6-0.9mm)
Stainless: 0.023-0.035" (0.6-0.9mm)
Flux Core: 0.030-0.035" (0.8-0.9mm)

Spool Gun Welding Wire

4043 Aluminum: 0.030-0.035" (0.8-0.9mm)

ARC Welding Rods

E6010: 1/16",3/32",1/8" - Polarity: DCEN
E6011: 1/16",3/32",1/8" - Polarity: DCEN
E6013: 1/16",3/32",1/8" - Polarity: DCEN, DCEP
E7014: 1/16",3/32",1/8" - Polarity: DCEN, DCEP
E7018: 1/16",3/32",1/8" - Polarity: DCEP

Duty Cycle

The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood MP200i has a duty cycle of 20% at 200 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 200 Amps with a 20% Duty Cycle, within a 10 Minute block of time you can weld for 2 Minutes with 8 Minutes of cooling for the Welder.

If the Duty Cycle is exceeded, the Welder will automatically shut off, however the fan will continue running to cool the overheated components. When a safe temperature has been reached, the Welder will automatically switch the Welder output back on. To increase the duty cycle you can turn down the Voltage Output control.

Eastwood Versa Cut 20 Plasma Cutter

Input: 110 VAC
Output: 15 Amps
Duty Cycle: 40% @ 15 Amps
Torch: Trafiment S25K
Torch Tip: 0.65 mm
Max Cut: 1/8"
Minimal Air Requirements: 3 CFM @ as low as 30 PSI
Torch Cable Length: 20'
Ground Cable Length: 10'

15 amps output at 86 volts, 40 percent duty cycle at 15amps, Recommend use with a 20 amp 120volt circuit.


Instructions

Click here for Eastwood MP200i instructions


Click here for Eastwood Versa Cut 20 instructions


Safety

Always wear dry, protective clothing and leather welding gloves and insulated footwear. Use suitable clothing made from durable flame-resistant material to protect your skin. Thoroughly read and understand this manual before using.

Click here to see safety products


Warranty

3 Year Warranty


Customer Reviews

Questions & Answers