• Home
  • Eastwood Patina Preserver Aerosol
Eastwood Patina Preserver Aerosol is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Works Great I have been using this to keep the patina on my vintage rusty tracker wheels and rusty parts that I want to last without making them look cheesy. It keeps the rusty patina and gives it a great finish without being too shinny. My only hope is that they keep the price down the cans don't seem to cover as much as you would expect
Date published: 2015-01-11
  • 2015-02-27T10:13CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_14995Z, PRD, sort_relevancy
  • clientName_eastwood

What needs to be done to remove the product if you want to paint at a later date? Can it be removed without bothering the original paint? Does it matter if you have old fashioned enamel paint when you remove it?

Asked by: Johnphil
All you would use to remove the product is a wax and grease remover which will not harm the paint already existing
Answered by: SeanA
Date published: 2015-01-08

Can this be used on good bare steel to prevent oxidation/rust during the build. Can it be or should it be removed when the painting process begins?

Asked by: boetie
You can either use that or the product fast etch which leaves a zinc phosphate coating behind to preserve metal. Both products will need to be removed and cleaned before painting.
Answered by: SeanA
Date published: 2014-11-24

does rust patina preserver come in quarts

Asked by: hillguy
No unfortunately we do not have the product in quarts currently only aerosols.
Answered by: SeanA
Date published: 2014-11-24

What type of prep and cleaning is suggested? I have a 50 Chevy car where the body itself doesn't have much surface rust where as the roof has more of a sun baked look to it , most of it is surface rust but some spots the rust is a little more heavier. 

Asked by: Goofybootz
Just clean the surface with pre painting prep or a wax and grease remover before application.
Answered by: SeanA
Date published: 2014-11-14

The Top of our Dodge Van has started rusting, does rthis product stop or slow down the rust from increasing? Not concerned about the color, but prefer clear or white...which is Van color.  Van not worth much, but would like for it to last a few more years

Asked by: Alawazeriwakilair
This product will slow the rust from spreading, but a better option would be our Rust Encapsulator. We offer Rust Encapsulator in Clear or White (in addition to other colors).
Answered by: NickC
Date published: 2014-10-22

Is this essentially a flat or Matt clear coat? 

Asked by: Tiny
Patina Preserver is not a conventional flat or matte clear coat. It goes on much thinner and is virtually invisible and does not alter the appearance of the patina'd surface.
Answered by: NickC
Date published: 2014-09-23

What surface prep is required before using this?  Do you need to sand or use prep solvents?

Asked by: jodphoto
Outside of masking any areas you do not want coated, the only prep needed is to make sure surface is clean and dry, then apply 2 to 3 light coats of Patina Preserver. Allow 5 minutes between each coat. Do not move part for at least 15 minutes, product is self leveling and movement may affect final coating. Full cure in 45 to 60 minutes
Answered by: NickC
Date published: 2014-10-02
  • 2015-02-27T10:22CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_14995Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Patina Preserver Aerosol

Item #14995Z Brand: Eastwood

High-grade patina preserving coat prevents further discoloration and protects surfaces from corrosion

Details

Eastwood's high-grade Patina Preserver Aerosol protects the surface of your car and preserves that hot vintage look

This high-quality, inexpensive Patina Preserver provides a clear protective coat on the body of your car that creates a safe barrier between your worn metals and natural elements. This spray-on preservative coat is 100% invisible to the naked eye, as it consists of Eastwood's exclusive micro-thin build, Nano Barrier Technology. This technology protects the surface of your car from further corroding, fading and tarnish, and it is compatible with such materials as aluminum, brass, copper, steel and more!

  • 1 can covers 12-16 square ft.
  • Spray coat is highly durable, UV and weather resistant
  • Prevents further rust

More info...

About Eastwood Patina Preserver Aerosol

The Eastwood Patina Preserver Aerosol is an inexpensive, long-lasting method for preserving your car's surface and limiting any additional wear and tear. This Patina Preserver will keep any vintage discoloration or fading exactly the way it is for a long time. If you have an old car you want to restore, this is the perfect product for you. The materials won't corrode any further and that classic look will remain exactly the same. The Patina Preserver Aerosol is ideal to use on entire vehicles, wheels, bumpers, interiors and just about any other metal surface you want to preserve.


Contents

14 ounces net weight


Accessories

10041ZS PRE Painting Prep, 43098L Nitrile Gloves, 14828 One Step respirator, 14792Z 2K AeroSpray matte Clear, 14791z 2K AeroSpray rat rod Black, 12196Z Chassis Kleen, 13791ZP Ceramic Engine Paint Kit


Safety

always wear eye, skin and respiratory protection when using this product. Apply in a well ventilated area away from open flame. Store in a cool dry place. Product has a 2 year shelf life. Consult MSDS for specific safety warnings.


Warranty

made in Canada


Application

Make sure surface to be preserved is clean and dry apply 2 to 3 light coats of Patina Preserver. Allow 5 minutes between each coat. Do not move part for at least 15 minutes, product is self leveling and movement may affect final coating. Full cure in 45 to 60 minutes. Clear protection lasts for approximately 12 months depending on conditions.


Customers also viewed: