- Eastwood PRE Painting Prep
Eastwood PRE Painting Prep
Item #10041 Pre Painting Prep
The final step in surface paint preparation—Eastwood's PRE™ Paint Prep—just spray or wipe on, and wipe off!
- Removes silicone, wax, polish, grease and dirt
- Helps promote paint adhesion
- Easy spray-on, wipe-off application
- Available in aerosol, 30-oz., or gallon
- Available in a Low-VOC formula for regulated areas
Proper surface preparation is one of the most important factors in helping you achieve a high-quality final finish. Our specially formulated PRE Paint Prep helps you prepare a surface for painting by removing dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for final painting or powder-coating. Auto paint prep gets no easier!
About Eastwood PRE Painting Prep
PRE Painting Prep is very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface that could interfere with paint adhesion.
A "Low-VOC" PRE Painting Prep Formula, #11949Z, is available for shipment to California.
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.
Choose from the following:
10041Z is the 11-oz. aerosol
11949Z is the "Low-VOC" 11-oz. aerosol
10194ZP is the 30-oz. bottle
21567ZP is the combination 30-oz. bottle and 11-oz. aerosol kit
10594ZP is the 1-gallon can
PRE Painting Prep is a blend of solvents that may damage plastic, so please test first.
Works better than lacquer thinner that can leave a film behind, possibly compromising paint adhesion. Use to prepare surfaces for all Eastwood paints, including our exhaust manifold paints. On waxed areas, or surfaces that may have silicones, more than one application may be necessary. The 11-oz. aerosol can treats 10 sq. ft.
Use in a well-ventilated area, or wear a respirator.
Customers also viewed:
Removes stains, corrosion... brightens aluminum surfacesOnly $26.99
Directs a focused blast to penetrate deep into hard-to-reach places
Starting at: $9.89
Sanding's done...now prep and mask the surface for paintingOnly $49.99
Clean grimy chassis and suspension parts with this aggressive formulaOnly $6.99
Dissolves rust, leaves a protective zinc-phosphate coating, all in 1 step
Starting at: $12.99
Preps any base metal for long- lasting topcoat; cleans and protects
Starting at: $15.99