- Eastwood Pressure Blaster Model 110
Eastwood Pressure Blaster Model 110
Item #22011 Brand: Eastwood
Eastwood Professional Abrasive Blaster handles your heaviest-duty rust and paint removal projects, day in and day out.
- 10 cfm at 90 psi
- 1/2"-I.D. hose, 10' long
- Includes 1/8" and 3/32" nozzles
- ASME-certified tank, 110-lb. media capacity
Just hook this 110-lb.-capacity pressure abrasive blaster to your air compressor, put on the appropriate hood and respiratory protection, fill with blasting media and you're ready to blast away rust and old paint.
About Eastwood Pressure Blaster Model 110
Built for the professional body shop, with a strong welded hopper, 2 heavy-duty nozzles, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient for everyday use. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pro pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10 cfm at 90 psi will work well. 22" x12" x 32" tall overall. 2-year limited warranty.
110-lb.-capacity Professional Abrasive Blaster
Two 1/8" Nozzles (each needs 15 cfm at 80 psi)
3/32" Nozzle (needs 7 cfm at 80 psi)
10' long, 1/2"-I.D. Abrasive Hose with automatic shut-off deadman valve
3 Seal Blocks
Top-loading, ASME-certified, pressure-tested Tank
22007A Deadman Valve Seal Blocks, Pack of 3
22012 Ceramic Nozzle, 3/32"
22013 Ceramic Nozzle, 1/8"
22015 Ceramic Nozzle, 3/16"
22016 Ceramic Nozzle, 1/4"
22017 Ceramic Nozzle, 5/16"
22005 Pull-Up Plunger Gasket
22040 Blast Hose, 20' long, 1/2" I.D.
Blast Media Selection Chart
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye and body protection must be worn during use. Inhalation of silica particles can cause cancer and other deadly diseases. Wear NIOSH-approved respiratory protection during operation.
This Pressure Blaster is ideal for cleaning larger parts that do not easily fit into a blast cabinet. The 90-psi pressure behind the abrasive, combined with the siphoning action at the bottom of the tank, delivers an aggressive blast that quickly removes paint and rust. Pressure blasters are many times faster to use than siphon blasters. To minimize the likelihood of distorting sheet metal, reduce pressure to 80 psi, increase gun distance at 45 degrees to the surface. Be sure to wear all appropriate safety equipment.
Questions & Answers
Customers also viewed:
An affordable way to media blast parts without taking up much room in your shop
100-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $139.99
Huge 200-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $207.99
50-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $119.99
USA-made 2-in-1 blaster works with as little as 10 cfm at 90 psiOnly $699.99
2-in-1 blaster works with as little as 10 cfm at 90 psiOnly $199.99