- Eastwood Radiator Black Paint
Eastwood Radiator Black Paint
Item #10040 EW Radiator Black
your radiator without damage
Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem.
- Factory Look Finish
- Heat Dissipating Formula
- Quick Drying
- Heat Resistant To 300 Degrees F
Durable Enamel formulation resists temperatures up to 300ºF, gas and chipping. One can covers 6 square feet (most radiators require 2 cans). Net wt. 12 oz.
Radiator Black Satin - Many have asked for a lower sheen radiator black. The lower satin sheen resembles the gloss level of modern plastic tank radiators and some imports.
About Eastwood Radiator Black Paint
Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem. This acrylic enamel factory-finish (85% gloss) withstands 300 degree F., sprays on thick enough to cover completely, yet thin enough to not interfere with heat transfer. Great for heater cores and air conditioning condensers, too! Each 12 oz net wt. can covers 6 sq. ft., most radiators require 2 cans for full coverage. Buy 3 or more and SAVE!
One 12 oz. net wt. aerosol can. Enamel, covers about 6 sq. ft.
DONT FORGET THESE PAINTING ESSENTIALS!
SAS Bandit Respirator
Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Customers also viewed:
Spray-on a protective, durable, aluminum-look finish
Starting at: $14.99
Make your engine compartment look as sharp as the rest of your carOnly $76.29