• Home
  • Eastwood Rubberized Rust Encapsulator 12/case 13651Z

    Eastwood Rubberized Rust Encapsulator 12/case 13651Z

    Item #EW13651Z

    EW Rubberized Rust Encapsulator 12/case 13651Z

    Details

    Unlike off the shelf under coatings, Rubberized Rust Encapsulator can beapplied directly over rust and without the bubbling that creates air pocketsthus trapping rust. Since its engineered with high tech flex agents, itspliable finish protects surfaces from abrasions, road hazards and deadenssound. So durable it exceeded 1,000 hours of salt spray chamber testing, thissurpasses the standards for a 2 component catalyzed coating! Simply applydirectly over rust or bare metal; no need to topcoat. Remains flexible anddurable. Satin black finish.

    About Eastwood Rubberized Rust Encapsulator 12/case 13651Z

    Unlike off the shelf under coatings, Rubberized Rust Encapsulator can beapplied directly over rust and without the bubbling that creates air pocketsthus trapping rust. Since its engineered with high tech flex agents, itspliable finish protects surfaces from abrasions, road hazards and deadenssound. So durable it exceeded 1,000 hours of salt spray chamber testing, thissurpasses the standards for a 2 component catalyzed coating! Simply applydirectly over rust or bare metal; no need to topcoat. Remains flexible anddurable. Satin black finish.


    Contents

    Aerosol net weight 15 ounces, 12 units


    Accessories

    10041z PRE Painting Prep16060z Rust Encapsulator51483z Rust Converter12515z Internal Frame Coating11175z Extreme Chassis Black10025z Original Chassis Black10025z Original Chassis Black10020z Exhaust Paint


    Safety

    Always wear eye, skin and respiratory protection. Always apply in a wellventilated area away from open flame.VOC Content ABP Max MIR 1.55


    Warranty

    made in USA


    Application

    Ensure surface is clean and free of greases, oils and debris. Shake well.Ideal application conditions are 70 degrees F at 50% or less humidity. Hold can10 to 12 inch from surface, apply medium coat to ensure maximum adhesion.Will flash dry in 30 to 60 minutes, full cure in 24 hours. Apply coats in minimumone hour intervals. No topcoat is needed, because of its flexible propertiesa topcoat may not adhere. Do not apply to hot surfaces such as exhaustsystems, engines or transmissions.