• Home
  • Eastwood 2K AeroSpray™ High-Gloss Clear
Eastwood's 2K AeroSpray™ High-Gloss Clear is rated 4.4333 out of 5 by 30.
Rated 5 out of 5 by from Great paint I was a little cautious at fiirst about this product. I have used other rattlecan clear coats and they really didn't do anything. The clear coat was used to cover a custom paint job on my Turbo Coupe and performed excellent. The 2k clear coat was very easy to use and not only did it dry hard and shinny but I has a flash time of 2 hours. It's a little expensive but I will use it again and I would recommend it to everyone.
Date published: 2013-10-20
Rated 4 out of 5 by from Good product I found that a better coat is achieved with the can held a distance of 8 to 10 inches and a passing spray speed that is not too fast or too slow. I had to experiment a little and, luckily, the product didn't run or sag.
Date published: 2014-01-29
Rated 5 out of 5 by from Clear Coat for my FRC Corvette Guys,this is by far the best clearcoat I have ever used !It lays down a gorgeous clear that looks to be a foot deep!It is hard, can be sanded and polished,I was very,very impressed!
Date published: 2014-04-14
Rated 5 out of 5 by from Great repair product 5 year old Wrangler developed a case of clear coat bubbling. Seems like either the dealer or Chrysler did a bandaid fix on it before I bought it new. I have sprayed a few cars in my time, but never attempted to "fix" a spot clear coat problem. Used the gray abrasive pad, and 1000 grit wet and dry to create the bond. This stuff sprayed as well as from my Devilbis guns. It glossed immediately, even in a pretty bad application environment (wrangler half in my garage, with California Santa Ana winds starting up). Ya, I know that is not a bright move on my part, but this stuff made it work against the odds. Another super Eastwood product. Got to also thank Kevin Tetz for his videos on prep, well worth the effort!
Date published: 2014-11-23
Rated 3 out of 5 by from 2K Clear Coat Used mine on Aluminum intake and valve covers. Both very porous. Everytime I touched them ,dirt or grease spots would show. Now totally protected ,no problems with engine heat ,and engine looks clean all the time. As far as Brian's reply . Wrap in Plastic wrap and put in freezer. Will last up to two weeks. Saw this ,I think it was in "Hot Rod", it works.
Date published: 2014-06-01
Rated 5 out of 5 by from 2K Clear wonder paint Lately, I've been blown away by the new coatings that Eastwood is offering, and the 2K clear is no exception. I refinished my 3-piece Speedline wheels, and the inner barrel was refinished with their Silver Cadmium (which matched the original finish (EXACTLY) and then I shot the finish with the 2K clear. Looks absolutely amazing. Thanks, Eastwood!
Date published: 2013-11-18
Rated 2 out of 5 by from Good spray pattern, fast dry Easy to apply with good spray pattern, apply with multiple thin coats 30 minutes apart, let dry, then sand to an even surface the next day with 1200 grit, then 3000 grit, and polish with rubbing compound to a beautiful gloss.
Date published: 2014-01-30
Rated 5 out of 5 by from easier to use and as good as conventional hvlp stated pot life is 48 hours but it was still useable on the 4th day after activation. Tremendous value for the price.
Date published: 2014-12-06
Rated 5 out of 5 by from Awesome Is rock hard; makes faded wheels look new. This is so much easier than mixing and shooting with a gun
Date published: 2014-03-12
Rated 4 out of 5 by from great product Although I thought this would dry a little quicker, it provides a nice professional finish.
Date published: 2013-06-13
Rated 5 out of 5 by from Was surprised this came out of a can! The clear coat turned out great on my dirt bike frame. Couldn't afford a decent spray gun yet, heard about the 2k clear in a rattle can, thought I would give it a try. Turned out it was a good choice, will buy again for small projects.
Date published: 2014-12-10
Rated 5 out of 5 by from Great look and durable I used the Hi Gloss on a motorcycle tank, fenders and frame a couple of years ago. I did a little wet sanding between coats. The finish is great. I've seen for myself that it is completely resistant to fuel spills. I'll keep using it.
Date published: 2015-02-21
Rated 1 out of 5 by from poor quality i purchased one can of primer and 2 cans of clear the primer split out from the can. then i tried to use the clear and had the same problem. i have learned my lesson on spray cans.never again
Date published: 2015-04-15
Rated 5 out of 5 by from Great Alternative to a Spray Gun This product sprayed great and wet sanded and polished like an automotive clear. I highly recommend it as an alternative to using a spray gun.
Date published: 2015-02-20
Rated 5 out of 5 by from Spray gun quality This was a great solution to doing some clear touchup work on my painting project. The clear laid down great and with minimum orange peel.
Date published: 2015-04-20
Rated 4 out of 5 by from awsome results Love this stuff, layed out perfectly, brilliant shine, EASY to use. A shame the remainder has 48 hr pot life, wasted half a can, ahh.
Date published: 2013-09-20
Rated 5 out of 5 by from like this product It works just like a spray gun a no brainer had a few runs but the overall finish was great I would buy this product again!
Date published: 2013-11-04
Rated 5 out of 5 by from Great Product Have used this before. Easy to use, can spray even though I have RA. Beautiful finish. Pot life depends on temperature.
Date published: 2015-03-31
Rated 5 out of 5 by from Excellent Stuff! Used this over the 2K high build primer for the interior of a race car. It's perfect. Loved it. Wear a respirator!
Date published: 2014-04-24
Rated 4 out of 5 by from Worked perfectly I sprayed this over the 2K grey hi build primer for a finish inside a race car. It was perfect!
Date published: 2014-05-01
Rated 5 out of 5 by from clear easy stuff to use. next day buff out and looks great
Date published: 2014-12-01
Rated 5 out of 5 by from A++++ Can't beat the quality!!
Date published: 2013-09-25
  • 2015-05-04T09:16CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_14148Z, PRD, sort_relevancy
  • clientName_eastwood

Can the 2K Aerospray be directly applied over a newly powder coated surface??

Asked by: Hitmanvese
The materials are not incompatible, but it is far from ideal to apply paint over powder. If you need to, the powder coated surface will need to be sanded in order to accept any top coat. There will be no chemical bond between the two materials so you'll need to rely on mechanical adhesion in the form of sanding.
Answered by: MikeL
Date published: 2014-12-15

Can this product be used over epoxy painted surface?

Asked by: jjones
Yes, you can apply this clear over any cured epoxy finish.
Answered by: MikeL
Date published: 2015-04-17

Can this be sprayed over urethane base coats and or kandy coats?

Asked by: D Hub
Yes, this can be applied like a normal clear over base/SSU/Candeez/Water Bourne (Auto Air)
Answered by: SeanA
Date published: 2014-12-02

Will this work on Plastic Tail lights??

Asked by: harry62
Yes, you can use this clear over bare plastic if the surface has first been coated with plastic adhesion promoter.
Answered by: MikeL
Date published: 2014-11-18

Can this be used on plastic headlights?

Asked by: Robocam
Yes, you can apply this material directly to bare plastic after using a clear plastic adhesion promoter.
Answered by: MikeL
Date published: 2014-11-18

Good afternoon, Can this product be used over Eastwoods Silver Rust Encapsulator for a car roof project? And is there any prep required to the Encapsulated roof? Thanks.

Asked by: Anthonys Cars
No the clear will not work over Rust encapsulator
Answered by: SeanA
Date published: 2014-11-11

Can Eastwood's 2K AeroSpray™ High-Gloss Clear, be used over a Powder Coated Surface/product?. Also,  pre preg carbon/kevlar?. Hope you can help Kind Regards David

Asked by: DJJAW11
Hi,NikC ... still ideally sand with grit 600, on the powdercoat,ideally?. What if the powdercoat, is virgin not used as of yet?.
Answered by: DJJAW11
Date published: 2014-10-24

Can this be used over lacquer clear coat?

Asked by: Pacman
Unfortunately not many catalyzed products on the market are compatible with any sort of lacquer based products.
Answered by: SeanA
Date published: 2014-10-17

How long do you have to use the paint once it has been activated?

Asked by: FranzH
Pot life, once activated, is 48 up to 72 hours at 68 degrees F.
Answered by: SeanA
Date published: 2014-10-07

Can this be applied over the rad rod satin product to ostensibly create a gloss black.  

Asked by: launch
Yes, that will work very well! Make sure you allow for the proper flash time between coats and after your last coat of Rat Rod Black, and then move on to your coats of high gloss clear.
Answered by: MikeL
Date published: 2014-11-01

Can this be used over regular spray paint to provide UV and solvent protection? 

Asked by: DaveR
2K AeroSpray Clear works over most spray paints. It is compatible with Eastwood's aerosol paints.
Answered by: NickC
Date published: 2014-09-29

How will the 2K Clear work with bare metal (polished aluminum) and a clear coated wheel? Thanks

Asked by: BostonMonte
This can be applied over polished metal, but the metal must first be cleaned. PRE is good at removing any polishing residue that may remain on the item. For clear coated wheels, if the clear is in good shape, lightly scuff with a red scotchbrite pad and then clean and apply the clear.
Answered by: NickC
Date published: 2014-09-16

Will this product stand up to engine heat ? Thinking of using it on a Hilborn injection manifold.

Asked by: andy34
A better option for your application would be Eastwood's 2K High Temperature Gloss Clear. This product is heat resistant up to 450F. http://www.eastwood.com/2k-aerospray-high-temp-gloss-clear.html
Answered by: NickC
Date published: 2014-11-25

i purchased this item back in Jun 2013 but haven't had the chance to use it yet, would it still be safe to apply it on my vehicle? also would one can be enough to apply 3 coats on my sedan's rooftop with a sunroof!!? thanks in advance.

Asked by: soumaine

How many cans of the 2k aerospray clear are required to apply 3 or 4 coats on a full-size pickup truck? 

Asked by: MannyDantyla

I have a 2010 challenger painted the brilliant black. how do your prep a painted finish for the 2k clear high gloss product. would this be good for the rocker areas and nose areas of a car? would appreciate any other info. thanks.

Asked by: danmik

can this product be used over elastiwrap?

Asked by: robah55
  • 2015-05-04T09:34CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_14148Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood 2K AeroSpray™ High-Gloss Clear

Item #14148Z Brand: Eastwood

Precision of a 2-component coating without the paint gun

Details

Eastwood 2K High-Gloss Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...

About Eastwood 2K AeroSpray™ High-Gloss Clear

Eastwood's 2K High Gloss Clear Aerosol allows you to paint with the durability and precision of a two component coating without the paint gun! Formulated with Eastwood's proprietary technology to provide a long lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll acheive professional results from an aerosol.


Contents

12 Ounces net weight


Accessories

10041Z PRE Painting Prep.
12196Z Chassis Kleen
1449Z 2K Epoxy Primer
16060Z Rust Encapsulator
51483Z Rust Converter
12846Z Aerosol Injected Cleaner
11456 Respirator.


Product Info Sheets

Click Here for product info sheets


Safety

Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Warranty

Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.


Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.


Customers also viewed: