• Home
  • Eastwood '68 GM Rally Red Paint

Eastwood '68 GM Rally Red Paint

Item #51706 ZP 68 GM Rally Red

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood's premium '68 GM Rally Red Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

  • 96-fl.-oz. '68 GM Rally Red Automotive Paint
  • 32-fl.-oz. Activator required (included in 51706)
  • Catalyzed urethane for unsurpassed durability
  • Highly resistant to UV rays, chemicals, chips

About Eastwood '68 GM Rally Red Paint

Eastwood's Muscle Colors are blended to replicate your favorite colors of the '60s and '70s. Applicable to GM Paint Code 974 1986 Corvette.

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


Contents

Choose from the following:
51706ZP is the '68 GM Rally Red Single-Stage Urethane Topcoat, Gallon, with Activator
50273ZP is the '68 GM Rally Red Topcoat, Gallon, without Activator
21856ZP is the Eastwood Urethane Activator, 32-oz.


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


Accessories

10194ZP PRE Painting Prep, Quart
51605 Concours HVLP Paint Gun Kit
51686 Concours HVLP Detail Gun
20474 4-Stage Dry Air System
50040ZP Master Paint Prep Kit
51561Z 6" Liquid Ice Buffing Kit
34053 Hobby Air Fresh-Air System
51559 Digital Regulator
50244ZP Epoxy Gray Primer, Gallon
50245ZP Epoxy Primer Catalyst, Gallon
50240ZP 2K Urethane Gray Primer, Gallon
50241ZP 2K Urethane Primer Catalyst, Quart


FAQs

(Q) Do I need a clear?
(A) No, but you should use a clearcoat over metallics.

(Q) How much paint do I need?
(A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


MSDS Sheet

Click Here for Material Safety Data Sheet


Product Information Sheet

Click here to view product information sheet


Safety

Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


Customers also viewed: