Details

About Eastwood's Canyon Dusk Copper Metallic Paint

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 3:1 single-stage topcoat system requires activator included.
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

13991 Z - Eastwood Canyon Dusk Copper Metallic, 3-quart
Eastwood Urethane Activator, 1-quart

12776 Evolution HVLP Composite Paint Gun
51550 Concours HVLP Paint Gun
20474 4-Stage Desiccant System
12573ZP Clean & Prep Kit
12854 Electric Paint Shaker
12114 Paintucation 5-DVD Set
51561Z Liquid Ice Finishing System
20397 Pure Air Respirator System

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion.Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70 degrees–.HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours. Refer to 50200INST for more information

Always wear appropriate eye, skin and breathing protection. Always paint in a well-ventilated area away from open flame. Consult MSDS for specific safety instructions.