• Home
  • Eastwood's Canyon Dusk Copper Metallic Paint

Eastwood's Canyon Dusk Copper Metallic Paint

Item #13991 Z Canyon Dusk Copper Metallic

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood's premium Canyon Dusk Copper Metallic Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

  • 96-fl.-oz. Canyon Dusk Copper Metallic Automotive Paint
  • 32-fl.-oz. Activator required (included in 13991)
  • Catalyzed urethane for unsurpassed durability
  • Highly resistant to UV rays, chemicals, chips

About Eastwood's Canyon Dusk Copper Metallic Paint

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


Contents

Choose from the following:
13991ZP is the Canyon Dusk Copper Metallic Single-Stage Urethane Topcoat, Gallon, with Activator
50286ZP is the Canyon Dusk Copper Metallic Topcoat, Gallon, without Activator
21856ZP is the Eastwood Urethane Activator, 32-oz.


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


Accessories

10194ZP PRE Painting Prep, Quart
51605 Concours HVLP Paint Gun Kit
51686 Concours HVLP Detail Gun
20474 4-Stage Dry Air System
50040ZP Master Paint Prep Kit
51561Z 6" Liquid Ice Buffing Kit
34053 Hobby Air Fresh-Air System
51559 Digital Regulator
50244ZP Epoxy Gray Primer, Gallon
50245ZP Epoxy Primer Catalyst, Gallon
50240ZP 2K Urethane Gray Primer, Gallon
50241ZP 2K Urethane Primer Catalyst, Quart


FAQs

(Q) Do I need a clear?
(A) No, but you should use a clearcoat over metallics.

(Q) How much paint do I need?
(A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


Safety

Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


Product Information Sheet

Click here to view product information sheet


Customers also viewed: