- Eastwood's High-Build Self-Etching Gray Primer
Eastwood's High-Build Self-Etching Gray Primer
Item #14260 High Build Primer
Eastwood's High-Build Self-Etching Primers have a true acid-etching formula that sticks to virtually any clean, bare, rust-free metal. These lacquer-based, metal-etching primers improve the adhesion and durability of most non-epoxy topcoats, and their high-build capabilities allow you to fill-in low spots and level-out surfaces prior to topcoating. When you use the quart or gallon can, you'll need a 1.8-2.0mm nozzle to spray these primers.
- Etches and primes bare metal in 1 step
- Fills-in imperfections, sands easily
- Strengthens adhesion, durability, and color hold-out
- Use with non-epoxy primers and topcoats
About Eastwood's High-Build Self-Etching Gray Primer
Eastwood's High-Build Self-Etching Primers improve the adhesion, durability, and color hold-out of topcoats. Not only do they etch and prime in one step, but their high-build formula also fills-in imperfections.
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.
Aerosol – 16 ozs.
Gallon – 128 ozs.
Quart – 32 ozs.
31160 Dura Block Sanding Blocks
10041Z PRE Painting Prep
12786ZP Urethane Primer, Quart
50242ZP Epoxy Primer, Quart
12776 Evolution Paint Gun
11456 Bandit Respirator
51136 Eastwood Paint Color Chart
Apply directly on clean bare metal that's free of waxes, grease and dirt. Use Eastwood's PRE Painting Prep to clean the surface. Apply several light coats until desired thickness and coverage is achieved. Wait 15 to 30 minutes between coats, with full cure in 48 hours, depending on conditions. For optimum results, apply at 70 degreesF at 50% humidity or less.
Always wear eye, skin and respiratory protection. Always apply in a well-ventilated area away from open flame. Consult MSDS for specific hazards and warnings.
Customers also viewed:
Touch-up surface imperfections before priming and top-coatingOnly $19.99
1k primer surfacer for superior adhesion to steel, alum., rigid plasticOnly $21.49
The foundation to a great paint jobOnly $169.99
Includes urethane primer, activator, mixing cups...even overallsOnly $99.99
Etches and primes bare, rust-free metal in one step
Starting at: $12.89
Highly durable primer/surfacer for fiberglass, aluminum, prepped steelOnly $25.99