- Eastwood Underhood Black Paint
Eastwood Underhood Black Paint
Item #10024 underhood black
OEM-matching finish under the hood
- This underhood paint has exceptional adhesion for an engine-compartment paint
- Just degrease parts first for a factory-like finish
- 11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet
About Eastwood Underhood Black Paint
Underhood Black is the correct shade of black underhood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets and other parts. Black underhood paints from typical hardware stores are either too thick, too glossy, or the wrong color.
Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, underhood paint finish. Acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that doesn't hide surface details. Do not use with enamel primers.
10041Z PRE Painting Prep
16014Z Self-Etching Primer, Aerosol
16009ZP Self-Etching Primer, Quart
Q. How do I apply this underhood paint?
A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator.
Use in a well-ventilated area or wear a respirator.
Customers also viewed:
Durability and precision of a 2-component coating, without the paint gun
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $7.99
3X more resins make it 3X more durable than original Chassis Black
15-oz. aerosol reformulated withTWICE the corrosion resistance!
Restore the original color of metal parts, and protect against rustOnly $14.99