- Eastwood Underhood Black Paint
Eastwood Underhood Black Paint
Item #10024 underhood black
OEM-matching finish under the hood
Eastwood Underhood Black™ is the perfect lacquer paint for the correct OEM-matching finish under the hood...choose semi-gloss or matte.
- Restores OEM Low Gloss Finish
- Protects From Rust and Corrosion
- Fast Drying Formula
- Perfect for Firewalls and Inner Fenders
Underhood Black™ Semi-Gloss is just the right 10-20 percent semi-gloss finish for most radiator supports, inner fender walls, underhood brackets, and other under hood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet.Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."
About Eastwood Underhood Black Paint
Underhood Black is the correct shade of black underhood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets and other parts. Black underhood paints from typical hardware stores are either too thick, too glossy, or the wrong color.
Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, underhood paint finish. Acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that doesn't hide surface details. Do not use with enamel primers.
DONT FORGET THESE PAINTING ESSENTIALS!
SAS Bandit Respirator
Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Q. How do I apply this underhood paint?
A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator.
Use in a well-ventilated area or wear a respirator.
Customers also viewed:
Restore the original color of metal parts, and protect against rust
Durability and precision of a 2-component coating, without the paint gunOnly $22.99
Spray-on a protective, durable, aluminum-look finish
Starting at: $12.99
Matches original equipment with the look of freshly cast iron
Starting at: $12.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99
3X more resins make it 3X more durable than original Chassis Black
15-oz. aerosol reformulated withTWICE the corrosion resistance!