• Home
  • Eastwood UNDERHOOD BLACK® Paint

    Eastwood UNDERHOOD BLACK® Paint

    Item #10024 underhood black

    The perfect lacquer for a correct,
    OEM-matching finish under the hood


    Eastwood UNDERHOOD BLACK® is the perfect lacquer paint for the correct OEM-matching finish under the hood...choose semi-gloss or matte.

    • Restores OEM Low Gloss Finish
    • Protects From Rust and Corrosion
    • Fast Drying Formula
    • Perfect for Firewalls and Inner Fenders

    UNDERHOOD BLACK® Semi-Gloss is just the right 10-20 percent semi-gloss finish for most radiator supports, inner fender walls, underhood brackets, and other under hood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet.

    Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."

    More info...

    About Eastwood UNDERHOOD BLACK® Paint

    UNDERHOOD BLACK® is the correct shade of black under hood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, under hood brackets and other parts. Black under hood paints from typical hardware stores are either too thick, too glossy, or the wrong color.

    Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, under hood paint finish. Acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that doesn't hide surface details. Do not use with enamel primers.


    SAS Bandit Respirator
    Eastwood PRE Painting Prep
    Paint Mixing Cups 1QT
    Devilbiss Prep Wipes
    Painting Tack Rags
    Devilbiss Dekups 24oz
    Painters Masking Tape
    Painters Masking Paper
    Eastwood Air Injected Cleaner
    Eastwood Scuff Pads
    Razor Blades


    Q. How do I apply this under hood paint?
    A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator.


    Use in a well-ventilated area or wear a respirator.

    MSDS Sheet

    Click Here for Material Safety Data Sheet

    Customers also viewed: