• Home
  • Eastwood Shop Table Bracket Kit
Eastwood Shop Table Bracket Kit is rated 4.9 out of 5 by 15.
Rated 5 out of 5 by from bench brackets Far exceeded my expectations. Have not seen any product finished as well as these brackets in a long time. 3/16" steel is sooo much better than the sheet metal stuff that I have seen offered. The comments regarding hole placement are unfounded. They have to be offset to allow through bolts to pass each other; like airplanes in the sky, they can't all fly at the same altitude. Didn't read the instructions at all, designed and fabricated my own bench. I don't think they are expensive at all given the quality and functionality of the product received. Almost tempted to buy another just to have another in case I ever need to build another bench.
Date published: 2015-11-19
Rated 5 out of 5 by from Worth the money! Very happy with this product. While it seems expensive for some brackets, you'd be hardpressed to ever destroy them, and in the end, the table cost less than soem of the BigBox store workbenches that I researched. Sure, you could make one cheaper with just wood and no brackets, but it wouldn't be able to hold a car. :) Actually, I've found teh metal brackets to be useful for a couple of magnetic clips to hold paper, etc. Another reviewer noted that the brackets are not exactly the same, so don't use one as a template for all of the places you need them. Personally, I marked the holes with each bracket in its place. My only suggestion would be to round off one carner of each 4x4 so that it fits snug with the curve of the bracket.
Date published: 2015-05-27
Rated 5 out of 5 by from Now my neighbor wants one. they say you build your house on a good foundation. Well, as benches go, these are the foundation. I expect this bench will be in my kids garage someday. The bench went together extremely well after I assembles the bolts, limber top and varnish. I went a little overboard with my bench because it got to be fun putting it together. I cut a rabbit in the sides and back and installed plywood panels. It takes two men and a boy to move. Tunning cost; brackets-$120, lumber-$84, bolts-$65, butcher block top-$105. I already had tha varnish.
Date published: 2016-03-13
  • y_2017, m_10, d_18, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_31493, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Would this support a 40 gal aquarium weighing about 400 lbs?

Asked by: Mikee0328
Since this just the brackets for the corners the strength of the table is dependent on what you build it with.
Answered by: S Church
Date published: 2017-08-22

It is great idea, but not for $120.00 for 8 pcs of steel. Are they made in USA?

Asked by: msilvio
Website states made in China.
Answered by: Anonymous
Date published: 2017-02-23

Is this a corrosion resistant steel? Could they be left bare?

Asked by: North Dakotan
These come with an anti rust coating. If you would like to paint them simply clean with pre, scuff , and paint.
Answered by: S Church
Date published: 2016-07-28

Is this a complete kit, with all wood pieces, or is this just the steel brackets for $99.99?

Asked by: Rick2004
This will just be the steel brackets. You can add lumber or steel legs of your choice.
Answered by: S Church
Date published: 2016-03-23

dimention of the table?

Asked by: victor guys rivera
what ever you want, could be one x six, or four x eight; my frame is 24" wide x 60" long x 48" high, with a 36" x 72" x1" thick plywood top....works good, and worth the money. You try cutting, bending and drilling 8 pieces of 3/16 steel plate yourself without a shop (or a work bench)! my time is worth more than that. All in all it works
Answered by: Harv
Date published: 2017-04-21

Can you please advise the hole sizes?

Asked by: mcharnock
The holes are 1/2" square.
Answered by: MikeL
Date published: 2017-07-30

Can the brackets be used with 4 x 4 lumber for legs and 2 x 6 lumber for cross members?

Asked by: Rmcpherson1
Yes, the brackets are designed for use with 4x4s as legs, and 2x4s as cross supports, but 2x6s may be used if you'd like.
Answered by: MikeL
Date published: 2017-04-04
  • y_2017, m_10, d_18, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_31493, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Shop Table Bracket Kit

Item #31493 Brand: Eastwood

Sturdy steel brackets for quick do it yourself workbench construction with wood or steel

In stock

Only $109.99

Sale $98.99

 

Details

Sturdy steel brackets for quick do it yourself workbench construction.

  • 3/16 inch Heavy Gauge Steel
  • Durable powder coat finish to resist corrosion
  • Laser cut and CNC bent for accuracy
  • Bolt together with 4x4 and 2x4 lumber
  • Weld together with 2.5in tubing and 2in angle iron
  • 8 brackets in kit make 1 table
  • You decide height and width of the table by the lumber or steel purchased.

These shop table corner brackets take the guess work out of building your own work bench. Made from heavy duty 3/16 inch thick steel, these brackets are designed to use 4 x 4 lumber or 2.5in square tube as legs, and 2 x 4 lumber or 2in angle iron as framing members for the table surface. Precision laser cut and CNC bent, these brackets ensure that the legs and top will be parallel, plumb and square. Kit includes 8 brackets, all you need to do is add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.


More info...

About Eastwood Shop Table Bracket Kit

The Eastwood Workbench Brackets are fabricated from 3/16" thick, high strength steel and are designed to be used with wood or steel legs and framing members. Precision located, laser-cut holes are provided to allow convenient bolt together wooden construction or they may be used with steel framing members and welded for performance.


Contents

(8) Workbench Corner Brackets

Hardware is not included.


Instructions

Click here for product instructions


Safety

Always wear the proper safety equiptment outlined by the manufacture of the tool that you are using to assemble this table.


Warranty

Lifetime Warranty. Made in China


Customer Reviews

Questions & Answers

Customers also viewed: