• Home
  • Eastwood Small-Job Blasting Systems

    Eastwood Small-Job Blasting Systems

    Item #13943a

    Try abrasive or soda blasting on smaller jobs, without a big investment

    Details

    Give abrasive or soda blasting a try with these introductory Blasting Kits These kits kit lets you try abrasive or soda blasting on smaller jobs, without a large initial investment. You'll realize the benefits of quickly removing rust and coatings down to clean bare metal in a fraction of the time it would take using other methods. Just connect the blasting gun to your home compressor, put on your protective gear, and place the pickup tube in the bottle of media (included).
    • Suction head draws media into the air stream
    • Trigger action lets you blast exactly where you want
    • Requires 7 cfm at 80 psi
    • 10 lbs. of blasting media included (ground glass or soda)

    More info...

    About Eastwood Small-Job Blasting Systems

    Suction head draws the soda or abrasive media into the air stream to minimize surging or skipping, and accelerates the media.

    Environmentally friendly, specially formulated Soda Blast Media strips paint without using chemicals, and without damaging metal. Maintenance "M" formulation has medium-sized crystals to blast-away old enamels, urethane, epoxies and lacquer coatings.

    Silica-free, 40/70 Ground Glass Abrasive Blast Media is a smart, non-hazardous substitute for silica sand and slag, and works best for paint, carbon and light rust removal.


    Contents

    Soda Blasting Intro Kit includes:
    Abrasive Blast Gun with pickup tube
    Soda Blast Media (Maintenance), 10 lbs.

    Abrasive Blasting Intro Kit includes:
    Abrasive Blast Gun with pickup tube
    Ground Glass Blast Media, 10 lbs.


    Accessories

    1377910LBS Additional Ground Glass Media - 10 lbs.
    13779 Additional Ground Glass Media - 50 lbs.
    11806 Additional Automotive (Medium) Bicarbonate Soda Media
    22095 Deluxe Sandblasting Hood
    22044 Replacement Steel Nozzle Set
    22043 Replacement Ceramic Nozzle Set


    Instructions

    Click here for product instructions


    Safety

    Wear a properly fitted dust mask or respirator, safety glasses or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Make sure the deadman valve is operating properly by depressing the valve lever and releasing; the nozzle should close under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.


    Customers also viewed: