• Home
  • Eastwood TIG200 AC/DC and Versa Cut 40 Plasma Cutter

Eastwood TIG200 AC/DC and Versa Cut 40 Plasma Cutter

Item #13908 TIG200 ACDC Plasma 40

Save when you buy them as a set for TIG welding and plasma-cutting jobs
  1. Eastwood TIG200 AC/DC Welder
    Item #20565

    Only $749.99

    Sale $679.97

    In stock

  2. Eastwood Versa-Cut 40 Amp Plasma Cutter
    Item #12740

    Only $549.99

    Sale $499.97

    In stock



Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut 40 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button on this page to get the special savings over individual prices!

Eastwood-engineered TIG welding machine, the TIG 200 AC/DC Welder, offers professional-quality TIG welding at an affordable price!
  • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
  • 1/4"-thick welding capacity
  • High-frequency start for precise arc control
  • Square-wave inverter for accurate aluminum TIG welding
The Eastwood Versa Cut 40 Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8" thick.
  • 110v or 220v AC input with inverter technology
  • 20' torch cable; 10' ground cable with clamp
  • Rated 40-amp output
  • Now with a black powder-coat finish

Click here for welder warranty information

More info...

About Eastwood TIG200 AC/DC and Versa Cut 40 Plasma Cutter

Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional machine. It has pre/post flow adjustment knobs to protect your weld and torch. If that's not enough it even has a foot pedal to control amperage so you can get going quick and not need to dial in the machine for a specific material. Included is the TIG200, torch, ground cable/clamp, regulator/hose, and is powered through a NEMA50 plug.
Plasma Cutter
This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

What is "Plasma Cutting"? A plasma cutting machine utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.


  • TIG200 Unit
  • Shielding Gas Regulator
  • Shielding Gas Hose
  • Ground Cable with Clamp (10ft)
  • TIG Torch (17 Series) which accepts industry standard cups, collets, and collet bodies (14ft)
  • Foot Pedal for Amperage Control
  • 110v to 200v Adapter Plug
  • Manual
  • Hand Held Shield
  • Hammer/Brush
  • #7 Cup (7/16”),#6 Cup (3/8”),#5 Cup (5/16”)
  • Long Back Cap,Short Back Cap
  • 3/32” Collet Body,3/32” Collet,1/16” Collet,2.0mm Collet
  • 2.0mm Red (Thoriated Tungsten)

Plasma Cutter
Includes: Versa Cut unit, torch assembly, ground clamp assembly, 110/220V adapter cord.

TIG 200 AC/DC Specs

•Input voltage: single phase 110 or 220 VAC (+/- 15%) @ 50-60Hz
•Input amperage: 28 amp
•Output amperage: 10-200amp AC/DC
•No-load voltage: 51
•AC duty cycle (%): 20-80 (80% at 100 amp- 20% at 200 amp)
• Pulse duty cycle (%): 10-90
•Post gas flow: 2-8 sec
•Pre gas flow: 0.1-1 sec
•Remote foot pedal and control: yes
•Efficiency: (%): 80
•Weight: 44lbs
•The cleaning/clearance effect (AC balance control) of our unit is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive
)•The frequency is fixed at 60Hz which provides a little wider bead but with good penetration for aluminum and magnesium.
•Our Tig 200 is constructed with inverter and MOSFET technology for optimum performance at a very affordable price.

Versa Cut 60 Specs

Customer Reviews

Questions & Answers