• Home
  • Eastwood Versa-Bend Sheet Metal Brake

Eastwood Versa-Bend Sheet Metal Brake

Item #14042 Brand: Eastwood

Handle all sorts of precision metalworking projects with this versatile brake
Heavy Weight Item-Special shipping charges may apply.
This item is temporarily out of stock. Due in early January.

Details

The Eastwood Versa-Bend 20-Inch Offset Sheet Metal Brake is a precision-engineered metalworking tool designed to produce both standard variable length bends as well as accurate 1/2-Inch offset bends up to 90 Degrees in 20-gauge sheet steel and 18-gauge aluminum in widths up to 20 inches. Also capable of creating bends in 18-gauge steel in widths less than 12 inches. Create floor reinforcement channels and ribs, sections of corrugated pickup bed floors; truck bedside panels, inner fender structures and much more all with one convenient vise or bench-mount tool.

About Eastwood Versa-Bend Sheet Metal Brake

The Eastwood Versa Bend 20 Inch Offset Sheet Metal Brake is a precision engineered metal working tool designed to produce both standard variable length bends as well as accurate 1/2 Inch offset bends up to 90 Degrees in 20gauge sheet steel and 18 gauge aluminum in widths up to 20 Inch. Also capable of creating bends in 18 gauge steel in widths less than 12 Inch. Create floor reinforcement channels and ribs, sections of corrugated pickup bed floors;truck bedside panels, inner fender structures and much more all with one convenient vise or bench mount tool.


Contents

1 Offset Metal Brake Assembly, 2 Actuating Rods, 1 Vice Mount Tab and hardware, 2 Bench Mount Brackets and hardware.


Accessories

28187 Bead roller with 6 mandrel sets,
51088 DIY Shrinker/Stretcher Complete set,
13475 Eastwood Electric Metal Shears,
11797 Throatless Shear,
14042 Eastwood 12 Inch Slip Roll


Instructions

Click here for product instructions


Safety

This tool is considerably heavy. Use extreme caution when mounting or dismounting when using a vice or other temporary fixturing arrangement. Personal injury could occur if tool is dropped. Pinch Hazard. Keep fingers away from moving parts when operating. Wear appropriate work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands and arms. Wear appropriate eye protection. Metal chips can be ejected during the bending process.


Customers also viewed: