- Eastwood Versa-Bend Sheet Metal Brake
what is the lenth of the bender ,,how long of a piece of sheet metal say 10 foot long
In the video, before inserting the sheet to be bent, he inserts a piece of sheet metal with a 90 degree bend and leaves this in for all bending operations. Can you explain if this is necessary and why he did this?
Eastwood Versa-Bend Sheet Metal Brake
Item #14042 Brand: Eastwood
About Eastwood Versa-Bend Sheet Metal Brake
The Eastwood Versa Bend 20 Inch Offset Sheet Metal Brake is a precision engineered metal working tool designed to produce both standard variable length bends as well as accurate 1/2 Inch offset bends up to 90 Degrees in 20gauge sheet steel and 18 gauge aluminum in widths up to 20 Inch. Also capable of creating bends in 18 gauge steel in widths less than 12 Inch. Create floor reinforcement channels and ribs, sections of corrugated pickup bed floors;truck bedside panels, inner fender structures and much more all with one convenient vise or bench mount tool.
1 Offset Metal Brake Assembly, 2 Actuating Rods, 1 Vice Mount Tab and hardware, 2 Bench Mount Brackets and hardware.
28187 Bead roller with 6 mandrel sets,
51088 DIY Shrinker/Stretcher Complete set,
13475 Eastwood Electric Metal Shears,
11797 Throatless Shear,
14042 Eastwood 12 Inch Slip Roll
This tool is considerably heavy. Use extreme caution when mounting or dismounting when using a vice or other temporary fixturing arrangement. Personal injury could occur if tool is dropped. Pinch Hazard. Keep fingers away from moving parts when operating. Wear appropriate work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands and arms. Wear appropriate eye protection. Metal chips can be ejected during the bending process.
Customers also viewed:
Quick, clean cuts in metal: straight, curved or more intricateOnly $179.99
2 separate bodies: 1 shrinks, 1 stretches... no switching neededOnly $199.99