• Home
  • ElastiWrap™ Surface Prep Aerosol

ElastiWrap™ Surface Prep Aerosol

Item #14933Z Brand: Eastwood

ElastiWrap™ Surface Prep Aerosol

Details

ElastiWrap™ Surface Prep aerosol is formulated to prepare painted surfaces prior to applying ElastiWrap™ or other flexible removable coatings. Its deep penetrating cleaning properties remove embedded contaminants from the surface that can impede top coat adhesion and removal. ElastiWrap™ Surface Prep also leaves a smooth wax like finish that will enhance adhesion and make topcoat removal easier. Safe for use on all types of glossy painted surfaces as well as safe for glass, plastic and rubber. One aerosol can will cover an entire car.

About ElastiWrap™ Surface Prep Aerosol

ElastiWrap Surface Prep aerosol is formulated to prepare painted surfaces prior to applying ElastiWrap or other flexible removable coatings. Its deep penetrating cleaning properties remove embedded contaminants from the surface that can impede top coat adhesion and removal. ElastiWrap Surface Prep also leaves a smooth wax like finish that will enhance adhesion and make topcoat removal easier. Safe for use on all types of glossy painted surfaces as well as safe for glass, plastic and rubber. One aerosol can will cover an entire car.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.


Contents

net Weight 16.5 ounces


Accessories

14969 Microfiber Towels
13375 Soft Edge masking tape
11844 Tire and wheel masks
14878 Eastwood Turbine Gun System
12776 Evolution HVLP Paint Gun
14456 bandit respirator
43098L Nitrile Gloves
20405 Coveralls
14743 masking paper


Safety

Always wear eye, skin and respiratory protection when using this product. Do not use near open flame. Use in a well ventilated area.


Warranty

made in USA


Application

1. For best results, wash vehicle with mild soap and water before using this product, allow to dry completely.
2. Shake can well.
3. Apply a small amount of ElastiWrap Surface Prep to a clean microfiber towel or clean cloth towel. In an inconspicuous area, rub damp rag onto glossy painted surface and make sure the product is compatible with the paint.
4. Starting at the top of the vehicle and working your way down, liberally spray ED Surface Prep over one panel at a time (roof, hood, door, etc) and wipe in a circular motion until surface is clean and dry.


Customers also viewed: