• Home
  • Eastwood Epoxy Primer and Catalyst Kit Gray Qt

    Eastwood Epoxy Primer and Catalyst Kit Gray Qt

    Item #51126ZP

    1:1 mixing gets you an easy-to-apply, long-lasting show-car finish
    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

    Details

    Eastwood's Gray Epoxy Primer 1:1 primes and seals, and the Catalyst hardens and cures...get both in 1 Kit Eastwood's Gray Epoxy Primer 1:1 is a user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes. Catalyst included hardens and cures the epoxy primer and top coat.
    • Gray color
    • Mix primer with catalyst 1:1
    • Sands easily 2-3 days after application
    • Contains no lead, chromate or isocyanates
    • DTM - Direct To Metal application for a strong bond
    • Reduce up to 20% to use as a sealer

    About Eastwood Epoxy Primer and Catalyst Kit Gray Qt

    May be applied over steel, aluminum, fiberglass, body fillers and existing finishes. Primer must be mixed with our 1:1 Catalyst included. Unlike most epoxy primers, Eastwood's Epoxy Primer is easy to sand 2-3 days after application.


    Contents

    50242 ZP 50243 ZP


    Accessories

    50040ZP 50041ZP 50042ZP


    Safety

    Always wear eye, skin and respiratory protection


    Warranty

    USA