• Home
  • Eastwood Epoxy White Primer and Catalyst 2 Gallon Kit

Eastwood Epoxy White Primer and Catalyst 2 Gallon Kit

Item #14760ZP Epoxy White Primer and Catalyst Kit

Eastwood White DTM Epoxy Primer and Catalyst


Eastwood DTM (Direct to Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.

  • Can be used as a primer or sealer
  • Excellent adhesion and corrosion resistance
  • Fast Drying & Maintains good color holdout
  • Sand-able - 2-3 days
  • Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes

Eastwood's Epoxy Primers are user friendly, 2 component primer/sealer that dries fast and maintains good color hold out on steel, aluminum, fiberglass, body fillers and existing finishes. Easy 1:1 mixing with included catalyst. Sands easily 2 to 3 days after application. Contains no lead, chromate or isocyanates.

More info...

About Eastwood Epoxy White Primer and Catalyst 2 Gallon Kit


After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.


HVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi


Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.


Click here for product instructions


Eastwood Epoxy Primer 2 Gallon Kit: Includes 128 ounces of primer and 128 ounces of catalyst


Eastwood Urethane Reducers
51604 Concours Primer/Base Paint Gun
12569 Master Gun Cleaning Kit
12846Z Eastwood Aerosol-Injected Cleaner
10041ZP PRE Painting Prep
11456 Bandit Respirator
20473 2 stage air dryer system


Always wear eye, respirator and skin protection. Use in a well ventilated area away from open flame. Consult MSDS for specific warnings and precautions


Made in USA


See product information Sheet

Customers also viewed: