1.79 pounds net weight

always wear eye, skin and respiratory protection when using this product. Concult Evercoat SDS for specific safety warnings. 15228 Respirator,20474 4 stage Dryer System,14776 Concour PRP 2 Gun set, 31160 Dura Block 7 piece sanding block kit, 15146, 15149, 15151 Eastwood Sand Paper Job Packs

Clean surface thoroughly. Remove all dirt, oil, grease and wax. Use 40 80 grit grinding disc to remove paint. Surface must be completely dry before applying FIBER TECH. 1) Place filler on a clean, non fibrous mixing board or hard surface. 2) Add a ribbon of cream hardener from edge to edge across a 4IN diameter puddle of filler. 3) Mix thoroughly until a uniform color is achieved. Approximate setting time is 5 6 minutes @ 75 degree F to 80 degree F. Grind or rough sand hardened filler to desired contour. Apply a finish coat of lightweight body filler or glazing putty.