• Home
  • Evercoat Micro Pinhole Eliminator Kit

Evercoat Micro Pinhole Eliminator Kit

Item #12061Z Brand: EverCoat

Quick fix for hard-to-find micro
pinholes prior to primer application

Details

Evercoat's 440 Express Micro Pinhole Eliminator is a quick fix for micro pinholes that are hard to identify prior to primer application. This 1K patented technology is a high-solids polyester that is easy to apply and quick to dry. 440 Express will not shrink, therefore preventing the micro-pinholes from showing through the repair after the vehicle has been painted. It only takes 30 seconds to a better repair! Kit includes 4oz bottle of 440 Express applicator backing pad and applicator sponges.

About Evercoat Micro Pinhole Eliminator Kit

Evercoat's 440 Express Micro Pin Hole Eliminator is a quick fix for micro pin holes that are hard to identify prior to primer application. This 1K patented technology is a high-solids polyester that is easy to apply and quick to dry. 440 Express will not shrink, therefore preventing the micro-pinholes from showing through the repair after the vehicle has been painted. It only takes 30 seconds to a better repair! Kit includes 4oz bottle of 440 Express applicator backing bad and applicator sponges.


Contents

4 oz bottle of 440 Express applicator backing bad and applicator sponges.


Application

Shake 440 Express and apply a small amount on the applicator spongeWipe across entire area repair area.Continue to wipe until a light coat of 440 has been applied.allow to dry 15 minutes and apply surfacer/primer.if you over applied 440, it can be sanded with 400-500 grit abrasive.not recommended over conventional body fillers and primer-surfacer, use overglazes and finishing putties.


MSDS Sheet

Click Here for Material Safety Data Sheet


Safety

always wear eye skin and respiratory protection use in a well ventilated area.


Warranty

Made in the USA NSN # None


Application

Shake 440 Express and apply a small amount on the applicator sponge Wipe across entire area repair area. Continue to wipe until a light coat of 440 has been applied. allow to dry 15 minutes and apply surfacer/primer. if you over applied 440, it can be sanded with 400-600 grit abrasive.


Customers also viewed: