• Home
  • Evercoat Super Build Primer Gallon 4:1 12577ZP
Evercoat Super Build Primer Gallon 4:1 12577ZP is rated 4.7 out of 5 by 6.
Rated 5 out of 5 by from excellent product! Evercoat super build is a great product! It mixes easily sprays fantastic & flows beautifully and sands very easily! I used two coats on fairly smooth body work and was able to make it very straight with a long block and 180 grit sandpaper. I absolutely recommend this product to anyone restoring a classic car or anybody who's trying to get an extremely flat and straight surface on whatever project they are working on!
Date published: 2014-05-14
Rated 5 out of 5 by from super build prime this stuff is excellent ! get your body work straight then spray 2- 3 coats of this primer. then guide coat. then block it and you will get a really straight body. product does not shrink or crack like other poly primers.
Date published: 2015-11-16
Rated 3 out of 5 by from Thanks eastwood Ordered this product and when i recieved it the first time the lid was loose on the bottle of catalyst and it spilled in the box. Eastwood sent me a replacement right out and i had it within 4 days. Im no profesional and i had quite a time laying this down smooth. It turned out quite rough even using a 2.0 tip. Im disappointed in the sever roughness and it sand quite hard in my opinion but like i said maybe in the hands of a professional it would be different
Date published: 2016-06-13
  • y_2017, m_9, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_12577ZP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can I add reducer to Super Build 4:1? If so, with what reducer and up to how much?

Asked by: TimJL
You can thin this primer in small amounts with Acetone. No more than about 5% or it will affect the build of this product.
Answered by: KHoffnagle
Date published: 2017-09-09

I've got a fiberglass Jeep tub with rough, exposed chopped fiberglass on the firewall.  Can I use this as a filler to "smooth" the firewall to a more finished look?

Asked by: CJ7 Rebuild Guy
Yes, this can certainly be used on fiberglass for your application without any issues.
Answered by: KHoffnagle
Date published: 2017-09-05

Can you wet sand this product or will that allow moisture to be absorbed into it down to the metal?

Asked by: Doodles
Wet sanding of Polyester primer is not recommended.
Answered by: S Church
Date published: 2017-03-24

How much heat can it stand I am looking to paint a insulated bbq smoker

Asked by: Horse421
This product will only be good up to 200F.
Answered by: S Church
Date published: 2016-08-09

can you apply this over old paint finish? and if so what sandpaper grade to sand the paint with? thx.

Asked by: ridinlow6688
This can certainly be applied over top of existing finishes. Simply abrade with 220 grit prior priming.
Answered by: S Church
Date published: 2017-08-28

Can this be used over fiberglass?

Asked by: Bwill
This product can certainly be applied over fiberglass.
Answered by: S Church
Date published: 2016-07-12

Do you need to apply a sealer after final sanding before apply your base color coat?

Asked by: GWill
You can apply your color directly over without the need for a sealer.
Answered by: KHoffnagle
Date published: 2017-06-03

I've coated my 31 plymouth roadster body with superbuild 4:1.   Should I topcoat with urethane primer since I'm not planning to paint until I finish the build 

Asked by: Randy31
If the vehicle will be sitting for a while it would be a good idea to applying a sealer to protect the primer from absorbing any unnecessary moisture.
Answered by: S Church
Date published: 2016-05-16
  • y_2017, m_9, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_12577ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Evercoat Super Build Primer Gallon 4:1 12577ZP

Item #12577ZP

Primer/surfacer has twice the film build of other polyester primers
  1. Evercoat Super Build Primer Gallon 4:1
    Item #12577ZPA
    Only $89.99

    In stock

  2. Evercoat Catalyst 4:1 32 oz.
    Item #12577ZPB
    Only $24.99

    In stock

$0.00

Details

Evercoat® Super Build 4:1 Primer Surfacer has twice the film build of other polyester primers 2-component primer surfacer has exceptional filling capabilities, and can even be applied directly over properly sanded and cleaned bare metal. Easy 4:1 mix with catalyst included.
  • Direct-to-metal application—no need for epoxy or self-etch primers
  • Easy, accurate mixing
  • Less overspray than traditional polyester primers
  • Polyester Primer Catalyst included

More info...

About Evercoat Super Build Primer Gallon 4:1 12577ZP

Evercoat's Super Build 4:1 Polyester Primer-Surfacer has exceptional filling capabilities and can be applied directly to bare metal. You will appreciate the way it sprays out to a smooth, no texture finish is easy to sand level. The easy 4:1 mix makes setting it up a snap. Ideal for use on bare metal, SMC, rigid plastics, aluminum and over body fillers and putties. Super Build is compatible with both solvent and waterborne paints. VOC content 2.02 lbs/gallon. Must be activated with 12577 ZPB, included in this kit.


Contents

Primer: 1 US Gallon 128 ounces Catlayst: 1 US Quart, 32 ounces


Accessories

10041Z PRE Painting Prep 51550 Concours paint Gun 51136 Eastwood Color chart 31160 Dura Block sanding kit


Product Information Sheet

Click here for product information sheet


Safety

Always wear eye, skin and respiratory protection. Always use in a well ventilated area. Consult MSDS for specific safety warnings.


Warranty

Made in USA


Customer Reviews

Questions & Answers