• Home
  • Evercoat Super Build Primer Gallon Kit 4:1

    Evercoat Super Build Primer Gallon Kit 4:1

    Item #12577ZP Brand: EverCoat

    Primer/surfacer has twice the film build of other polyester primers

    Details

    Evercoat® Super Build 4:1 Primer Surfacer has twice the film build of other polyester primers 2-component primer surfacer has exceptional filling capabilities, and can even be applied directly over properly sanded and cleaned bare metal. Easy 4:1 mix with catalyst included.
    • Direct-to-metal application—no need for epoxy or self-etch primers
    • Easy, accurate mixing
    • Less overspray than traditional polyester primers
    • Polyester Primer Catalyst included

    More info...

    About Evercoat Super Build Primer Gallon Kit 4:1

    Evercoat's Super Build 4:1 Polyester Primer-Surfacer has exceptional filling capabilities and can be applied directly to bare metal. You will appreciate the way it sprays out to a smooth, no texture finish is easy to sand level. The easy 4:1 mix makes setting it up a snap. Ideal for use on bare metal, SMC, rigid plastics, aluminum and over body fillers and putties. Super Build is compatible with both solvent and waterborne paints. VOC content 2.02 lbs/gallon. Must be activated with 12577 ZPB, included in this kit.


    Contents

    Primer: 1 US Gallon 128 ounces Catlayst: 1 US Quart, 32 ounces


    Accessories

    10041Z PRE Painting Prep 51550 Concours paint Gun 51136 Eastwood Color chart 31160 Dura Block sanding kit


    Product Information Sheet

    Click here for product information sheet


    Safety

    Always wear eye, skin and respiratory protection. Always use in a well ventilated area. Consult MSDS for specific safety warnings.


    Warranty

    Made in USA


    Application

    Abrade surface with 80 grit sandpaper Abrade and feather edge surface with 180 grit sandpaper If using over filler, abrade surface with 320 grit sandpaper Clean surface with PRE Painting prep to ensure it is contaminent free and dry Shake and/or mix primer thoroughly Mix 4:1 with catalyst Using a primer gun with 1.6 to 2.2 nozzle apply 2-3 coats allowing 5 min flash Ready to sand in about 2 hours. Pot life 60 minutes


    Customers also viewed: