• Home
  • Eastwood 2K AeroSpray Aerosol Epoxy Primer Gray
Eastwood 2K AeroSpray Aerosol Epoxy Primer Gray is rated 3.9 out of 5 by 70.
Rated 4 out of 5 by from Good product Well I really put this stuff to the test. Sprayed my entire engine bay and it worked great. It has a nice build as well so I I was able to cover small imperfections in the filler. It wet sands nicely (400 wet) and the 2K is no joke. I was Skeptical so I tried to wipe it off with Lacquer thinner and it dosen't wipe off. If you are getting large droplets and bad texture then you are too far back. Nozzle sprays like a paint gun so You need to spray it like a paint gun. Uuniform strokes, overlapping, stop spraying at the end of the panel start spraying on your way back, etc... When you get to last 1/4 of can becareful because it will start to sputter then. This wont be a concern if you are sanding it before paint.
Date published: 2013-10-17
Rated 4 out of 5 by from Good for some things, and not others This paint does spray out well and has a great vertical spread nozzle. It's really only good for parts, I think, because you can really only use it with the can held straight up and down. You can't paint a hood, for example. I used the epoxy primer and even on vertical surfaces, it left a line pattern unless a lot of paint was put down. A can doesn't cover much area and if you want to avoid a line pattern you need to put a lot down. By my calculation, if you wanted to prime a mid-size car, it would take about 25 cans to get sufficient coverage. You really can't go by the square footage that the can says it can cover.
Date published: 2015-09-12
Rated 3 out of 5 by from Works OK Happy that an epoxy primer is available in a can. The reviews I have read before purchasing are more obvious after actually using the product. I used it on the trunk of my car and glad to have it done with epoxy primer. But... because having to hold the can horizontal I only got good spray for about half of the can. So I had two cans thinking that was more than I needed but turns out that I could use at least one more can. I'm debating on what to do now by either leave it as it is or scuff it and add another coat. I also agree with others that the price is very high for the quantity.
Date published: 2015-09-17
  • y_2017, m_11, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_70
  • loc_en_US, sid_14149Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can I use this on calipers?

Asked by: Dragonwolf911
Since this is a standard primer it is not designed to handle the temperatures seen on braking systems.
Answered by: Scott C
Date published: 2017-11-14

After it cures/dries, how long do I need to wait before I spray the under hood product and do I need to scuff the 2K primed surface before spraying the under hood paint?

Asked by: Mymach
After 20-30 minutes of the epoxy drying you can go straight into your underhood black without scuffing.
Answered by: Scott C
Date published: 2017-10-27

Hi, I'm using this as a primer for rocker panel replacement skins. What type of paint can I use to cover this. My truck is white. I just need a top coat. Can I use enamel auto paint over the epoxy primer. Someone said I shouldn't use acrylic lacquer.

Asked by: den51
this is not an answer, but does your answer mean that I can acrylic lacquer over the epoxy filler? Thanks
Answered by: den51
Date published: 2017-10-06

Can this be applied over one week old Rustoleum Automotive "FILLER primer" that has been block sanded to 400.

Asked by: Jakedesign
As the Rustoleum is non catalzyed we would not be able to guarantee compatibility. If you were to try this you would want the first two coats to be light to minimize any chance of reaction.
Answered by: S Church
Date published: 2017-11-13

I would like to use this on the tinware of an antique VW. Can you tell me the max operating temp of the primer. It will be top coated with chassis satin black.

Asked by: beetlepete
The max temp for this primer will be around 200F.
Answered by: S Church
Date published: 2017-09-26

i plan on using this over my original paint that has clear coat fading in a certain area. what grit sand paper should i use to scuff up the original base coat before applying the epoxy primer?

Asked by: Newbie Painter
You can prep the existing paint with 400 grit prior to applying this and then your paint.
Answered by: S Church
Date published: 2017-09-25

Would sanding be required on polished aluminum? If so what grit would be needed? Thanks!

Asked by: Fx265
POR15 states that you could use the POR brand 2K paint directly on the POR15 paint while the POR15 is still tack and then there is no other prep to be done. This might be the same for Eastwood 2k paints.
Answered by: CoffeeJoe
Date published: 2017-11-07

Can I apply this 2k primer over cured POR-15?

Asked by: SMan
You would have to scuff the Por 15 first to ensure a mechanical bond. With that said we have not tested out products over the Por 15 for compatibility.
Answered by: S Church
Date published: 2017-06-30
  • y_2017, m_11, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_63
  • loc_en_US, sid_14149Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood 2K AeroSpray Aerosol Epoxy Primer Gray

Item #14149Z Brand: Eastwood

Precision of a 2-component coating without the paint gun

In stock

Only $22.99

Details

Eastwood's 2K Epoxy Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Epoxy Primer Available
  • Sprays Like a Paint Gun

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.


More info...

About Eastwood 2K AeroSpray Aerosol Epoxy Primer Gray

Can be applied over: steel, aluminum, fiberglass, body fillers, existing finishes
Do not apply over: self-etching primer, Lacquer
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.


Contents

12 Ounces net weight


Accessories

Eastwood PRE Painting Prep
Eastwood Chassis Kleen 18 oz Aerosol
Eastwood Black Rust Encapsulator
Eastwood Rust Converter
Eastwood Aerosol-Injected Cleaner 11 oz
SAS Bandit Respirator


Product Info Sheets

Click Here for product info sheets



Safety

Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Warranty

Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.


Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.


Customer Reviews

Questions & Answers

Customers also viewed: