Daily Deal
Don't Miss Out On Today's Daily Deal!
  • Home
  • EW 2K Ceramic Aerosol Chassis Black Satin
EW 2K Ceramic Aerosol Chassis Black Satin is rated 3.4 out of 5 by 41.
Rated 5 out of 5 by from I liked it. Used this paint to spray the tongue on my trailer. It sits outside all the time and the tongue is exposed and will kill a normal spray bomb paint pretty fast. So thought I would give this a try. I wanted a tough catalyzed paint. I thought the results were good. I didn't notice any goopy results like some of the other reviews. Coverage was good...finish bright and shiny as it was gloss black I used. I was a bit concerned about it working well as it sat on my shelf for about 2 years. Worked fine. I mixed it very well shaking the can for 5 mins or more. Its not a cheap paint but I feel a fair value for what you are getting.
Date published: 2015-07-29
Rated 5 out of 5 by from Excellent Great spray pattern. Excellent coverage. Looks fantastic. Can does not like being held at an angle for very long while spaying especially once you use about half the can up so plan to do any spraying that you will have to angle the can for while it is full then do areas that can will be held upright.
Date published: 2013-06-03
Rated 3 out of 5 by from Finish is tough but looks Heavy I have used two part sprays before with very good success but this paint went on very heavy / thick and did not 'lay down' once on the metal. I adjusted the spray head several times and had better results, but it looked amatuer-ish. I had to completely sand again and refinish my fan blade assy. the second time went better but looks too 'goopy' The finish is very tough and shiny but looks too thick like it was applied with too many coats. Honestly I probably should have used a different paint here as this paint is maybe intended for more rough surfaces designed to fill and smooth. I have done restorations for years professionaly and personally and I know how to prep parts, paint and detail properly. I would recommend this for rougher metal surfaces like the frame or suspension. But nicer, smooth parts I would use another paint here that is better suited for a clean finish.
Date published: 2013-06-04
  • y_2017, m_6, d_23, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_en_US, sid_14146Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can this paint be used safely on bar-b-q grill to refurbish grates?

Asked by: Gary Thacker
This paint is automotive grade and is not FDA approved and is not able to withstand the temperatures required for an application of that sort.
Answered by: KHoffnagle
Date published: 2017-04-25

I painted my frame but ran out of paint. There are spots where the coat is thin but took a week to get more paint. Can I spray directly on first coat or do I need to scuff the paint to apply next coat?

Asked by: Ryck
Your area would have to be scuffed or abraded before applying more of this paint.
Answered by: KHoffnagle
Date published: 2017-04-15

I would like to use this on a motorcycle gas tank. do I need to prime and clearcoat it? thanks

Asked by: Jack59
An epoxy primer is recommend for the best adhesion and durability. No clear is required.
Answered by: S Church
Date published: 2017-05-18

Approx how many fans would it take to cover a mid-sized sedan such as a Honda Accord?  Can it be applied directly over the current paint without a primer?

Asked by: jhardy0319
This could take upwards of 12 cans to cover completely.
Answered by: S Church
Date published: 2017-04-05

I need a paint for my leaf springs one coil springs this will work or I need some kind of stretching paint?

Asked by: Brujita
This product is certainly fine to be used on suspension parts.
Answered by: S Church
Date published: 2016-10-03

Are you still able to spry the 2K clear coat over the gloss chassis black to get an even higher gloss?

Asked by: Baylorgang
You can certainly apply a clear over our Ceramic chassis paint.
Answered by: S Church
Date published: 2016-10-04

Can the 2K paint be applied directly over a self-etch primer?

Asked by: lapierce66
This can certainly be applied over self etch primer.
Answered by: S Church
Date published: 2016-09-04

I am considering this paint for a motorcycle frame. I want a fairly high gloss finish. Should I also use the high gloss clear?

Asked by: ScubaSteve
This paint does not require any additional clears over top. The 2k Ceramic Chassis Black (if purchased in gloss version) will give you the high gloss finish you are looking for.
Answered by: KHoffnagle
Date published: 2017-01-27
  • y_2017, m_6, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_14146Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

EW 2K Ceramic Aerosol Chassis Black Satin

Item #14146Z

Durability and precision of a 2-component coating, without the paint gun

In stock

Only $24.99

Details

Eastwood's 2K Ceramic Chassis Black Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...

About EW 2K Ceramic Aerosol Chassis Black Satin

Eastwood's 2K Ceramic Chassis Black Aerosol allows you to paint with the durability and precision of a two component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll acheive professional results from an aerosol.


Contents

12 Ounces net weight


Accessories

Eastwood PRE Painting Prep
Chassis Kleen
2K Epoxy Primer
Eastwood Rust Converter
Eastwood Air Injected Cleaner
SAS Bandit Respirator


Product Info Sheets

Click Here for product info sheets


Safety

always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Warranty

Made in Germany using Eastwood's Nano ceramic technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.


Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.


Customer Reviews

Questions & Answers

Customers also viewed: