• Home
  • Eastwood 2K Self Leveling Seam Sealer Cartridge

    Eastwood 2K Self Leveling Seam Sealer Cartridge

    Item #51653Z Brand: Eastwood

    2-component, self-leveling seam
    sealer leaves a factory-like finish
    Use in a well ventilated area.

    Details

    After stripping a car or repairing a panel you should replace the seam sealer to protect your work from the elements. Eastwood's high-solids 2-component Self-Leveling Seam Sealer leaves a factory-like finish and will not crack or sag. Seals cracks, crevices and body seams as well as waterproofs and insulates. The specially designed 2 chambered cartridge and mixing tip ensure that you lay out a perfectly mixed bead. Work time is 5-10 minutes, paintable in 30-60 minutes and fully cured in 4 hours. Use on firewall and trunk seams, fender extensions, tail light openings, etc. Uses 26:1 application gun, item 46613

    More info...

    About Eastwood 2K Self Leveling Seam Sealer Cartridge

    After stripping a car or repairing a panel you should replace the seam sealer to protect your work from the elements. Eastwood's high-solids 2-component Self-Leveling Seam Sealer leaves a factory-like finish and will not crack or sag. Seals cracks, crevices and body seams as well as waterproofs and insulates. The specially designed 2 chambered cartridge and mixing tip ensure that you lay out a perfectly mixed bead. Work time is 5-10 minutes, paintable in 30-60 minutes and fully cured in 4 hours. Use on firewall and trunk seams, fender extensions, tail light openings, etc. Uses 26:1 application gun (#46613)


    Contents

    250 Ml cartridge includes 2 mixing tips


    Accessories

    10041Z PRE Painting Prep 31050 Flexible Caulk Strips 16006Z Cold Galvanize primer 16014Z Self Etching Primer 19613 320 Grit 9x11 sand paper 20457 12 pack of mixing tips


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Safety

    always wear eye, skin and respiratory protection when working with chemicals consult MSDS for proper safety warnings


    Warranty

    Made in Canada


    Application

    Make sure vehicle is on level ground. Remove old sealer. Wipe down area with PRE (10041z) to remove any debris and dust. Sand surface and apply primer/surfacer, let dry and sand with 320 grit abrasive. Install mixing tip. Put tube in 26:1 application gun (46613) and equalize the two parts until they are uniform in color. Apply product to surface. This product will flow out and self level.


    Customers also viewed: