• Home
  • Eastwood 2K Universal Urethane Adhesive Cartridge

Eastwood 2K Universal Urethane Adhesive Cartridge

Item #51654Z Brand: Eastwood

2-component urethane adhesive for
repairing rigid and flexible plastics
Use in a well ventilated area.

Details

Eastwood's Universal 2-component urethane adhesive is is designed for the repair of all types of rigid and flexible plastics. Its unique 2 part cartridge and mixing tip ensures a perfect 50/50 mix every time. Its medium speed work time is 5-10 minutes and an "unclamp" time of 30-45 minutes. This super strong 2k formula is ideal for interior pieces, plastic and urethane body panels, bumper covers, spoilers and much more. This cartridge requires a 26:1 application gun (46613) and cannot be used with a standard caulk gun. Each cartridge comes with 1 mixing tip.

More info...

About Eastwood 2K Universal Urethane Adhesive Cartridge

Eastwood's Universal 2-component urethane adhesive is designed for the repair of all types of rigid and flexible plastics. Its unique 2 part cartridge and mixing tip ensure a perfect 50/50 mix everytime. Its medium speed work time is 5-10 minutes and an "unclamp" time of 30-45 minutes. This super strong 2k formula is ideal for interior pieces, plastic and urethane body panels, bumper covers, spoilers and much more. This cartridge requires a 26:1 application gun (46613) and cannot be used with a standard caulk gun. Each cartridge comes with 1 mixing tip. Refill tips (#20547).


Contents

250 Ml cartridge includes 1 mixing tip


Accessories

10041Z PRE Painting Prep 46613 26:1 Application Gun 16006Z Cold Galvanize primer 16014Z Self Etching Primer 20547 12 pack of mixing tips


Safety

always wear eye, skin and respiratory protection when working with chemicals consult MSDS for proper safety warnings


Warranty

Made in Canada


Application

PREPARATION: Surface must be clean. Use Eastwood PRE (10041z) to remove debris, grease and oils. Prep surface with 80 grit paper and re-clean with PRE. APPLICATION: Install tip and equalize the two parts until the bead is an even mix (use scrap surface to test). Apply adhesive on substrate and allow 45-60 minutes to cure, then sand with 80 grit, followed by 220 grit.


Customers also viewed: